| 1 | smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.15.0-36-generic] (local build)
|
|---|
| 2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: SAMSUNG MZMPF032HCFV-000H1
|
|---|
| 6 | Firmware Version: FXM42H2Q
|
|---|
| 7 | User Capacity: 32,017,047,552 bytes [32.0 GB]
|
|---|
| 8 | Sector Size: 512 bytes logical/physical
|
|---|
| 9 | Rotation Rate: Solid State Device
|
|---|
| 10 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 11 | ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
|
|---|
| 12 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
|---|
| 13 | Local Time is: Tue Oct 16 10:55:34 2018 CEST
|
|---|
| 14 | SMART support is: Available - device has SMART capability.
|
|---|
| 15 | SMART support is: Enabled
|
|---|
| 16 | AAM feature is: Unavailable
|
|---|
| 17 | APM feature is: Unavailable
|
|---|
| 18 | Rd look-ahead is: Enabled
|
|---|
| 19 | Write cache is: Enabled
|
|---|
| 20 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|---|
| 21 | Wt Cache Reorder: Enabled
|
|---|
| 22 |
|
|---|
| 23 | === START OF READ SMART DATA SECTION ===
|
|---|
| 24 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 25 |
|
|---|
| 26 | General SMART Values:
|
|---|
| 27 | Offline data collection status: (0x02) Offline data collection activity
|
|---|
| 28 | was completed without error.
|
|---|
| 29 | Auto Offline Data Collection: Disabled.
|
|---|
| 30 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 31 | without error or no self-test has ever
|
|---|
| 32 | been run.
|
|---|
| 33 | Total time to complete Offline
|
|---|
| 34 | data collection: ( 0) seconds.
|
|---|
| 35 | Offline data collection
|
|---|
| 36 | capabilities: (0x53) SMART execute Offline immediate.
|
|---|
| 37 | Auto Offline data collection on/off support.
|
|---|
| 38 | Suspend Offline collection upon new
|
|---|
| 39 | command.
|
|---|
| 40 | No Offline surface scan supported.
|
|---|
| 41 | Self-test supported.
|
|---|
| 42 | No Conveyance Self-test supported.
|
|---|
| 43 | Selective Self-test supported.
|
|---|
| 44 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 45 | power-saving mode.
|
|---|
| 46 | Supports SMART auto save timer.
|
|---|
| 47 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 48 | General Purpose Logging supported.
|
|---|
| 49 | Short self-test routine
|
|---|
| 50 | recommended polling time: ( 2) minutes.
|
|---|
| 51 | Extended self-test routine
|
|---|
| 52 | recommended polling time: ( 10) minutes.
|
|---|
| 53 | SCT capabilities: (0x003d) SCT Status supported.
|
|---|
| 54 | SCT Error Recovery Control supported.
|
|---|
| 55 | SCT Feature Control supported.
|
|---|
| 56 | SCT Data Table supported.
|
|---|
| 57 |
|
|---|
| 58 | SMART Attributes Data Structure revision number: 1
|
|---|
| 59 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 60 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 61 | 1 Raw_Read_Error_Rate POSR-K 200 200 002 - 0
|
|---|
| 62 | 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
|---|
| 63 | 9 Power_On_Hours -O--CK 098 098 000 - 9370
|
|---|
| 64 | 12 Power_Cycle_Count -O--CK 095 095 000 - 4662
|
|---|
| 65 | 170 Unknown_Attribute PO--C- 100 100 010 - 764
|
|---|
| 66 | 171 Unknown_Attribute -O--CK 100 100 010 - 0
|
|---|
| 67 | 172 Unknown_Attribute -O--CK 100 100 010 - 0
|
|---|
| 68 | 173 Unknown_Attribute PO--C- 097 097 005 - 82
|
|---|
| 69 | 174 Unknown_Attribute -O--CK 099 099 000 - 51
|
|---|
| 70 | 183 Runtime_Bad_Block -O--CK 099 099 001 - 3826
|
|---|
| 71 | 184 End-to-End_Error PO--CK 100 100 097 - 0
|
|---|
| 72 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
|---|
| 73 | 188 Command_Timeout -O--CK 100 100 000 - 0
|
|---|
| 74 | 190 Airflow_Temperature_Cel -O---K 054 036 000 - 46
|
|---|
| 75 | 196 Reallocated_Event_Count -O---- 253 253 000 - 0
|
|---|
| 76 | 198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
|---|
| 77 | 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
|
|---|
| 78 | ||||||_ K auto-keep
|
|---|
| 79 | |||||__ C event count
|
|---|
| 80 | ||||___ R error rate
|
|---|
| 81 | |||____ S speed/performance
|
|---|
| 82 | ||_____ O updated online
|
|---|
| 83 | |______ P prefailure warning
|
|---|
| 84 |
|
|---|
| 85 | General Purpose Log Directory Version 1
|
|---|
| 86 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 87 | Address Access R/W Size Description
|
|---|
| 88 | 0x00 GPL,SL R/O 1 Log Directory
|
|---|
| 89 | 0x01 GPL,SL R/O 1 Summary SMART error log
|
|---|
| 90 | 0x02 GPL,SL R/O 1 Comprehensive SMART error log
|
|---|
| 91 | 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
|
|---|
| 92 | 0x06 GPL,SL R/O 1 SMART self-test log
|
|---|
| 93 | 0x07 GPL,SL R/O 1 Extended self-test log
|
|---|
| 94 | 0x09 GPL,SL R/W 1 Selective self-test log
|
|---|
| 95 | 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log
|
|---|
| 96 | 0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
|---|
| 97 | 0x30 GPL,SL R/O 1 IDENTIFY DEVICE data log
|
|---|
| 98 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|---|
| 99 | 0xa0 GPL,SL VS 16 Device vendor specific log
|
|---|
| 100 |
|
|---|
| 101 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
|---|
| 102 | No Errors Logged
|
|---|
| 103 |
|
|---|
| 104 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
|---|
| 105 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 106 | # 1 Short offline Completed without error 00% 9370 -
|
|---|
| 107 |
|
|---|
| 108 | SMART Selective self-test log data structure revision number 1
|
|---|
| 109 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 110 | 1 0 0 Not_testing
|
|---|
| 111 | 2 0 0 Not_testing
|
|---|
| 112 | 3 0 0 Not_testing
|
|---|
| 113 | 4 0 0 Not_testing
|
|---|
| 114 | 5 0 0 Not_testing
|
|---|
| 115 | 255 0 65535 Read_scanning was completed without error
|
|---|
| 116 | Selective self-test flags (0x0):
|
|---|
| 117 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 118 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 119 |
|
|---|
| 120 | SCT Status Version: 3
|
|---|
| 121 | SCT Version (vendor specific): 256 (0x0100)
|
|---|
| 122 | SCT Support Level: 1
|
|---|
| 123 | Device State: SCT command executing in background (5)
|
|---|
| 124 | Current Temperature: 46 Celsius
|
|---|
| 125 | Power Cycle Min/Max Temperature: 21/46 Celsius
|
|---|
| 126 | Lifetime Min/Max Temperature: 0/70 Celsius
|
|---|
| 127 | Under/Over Temperature Limit Count: 0/0
|
|---|
| 128 |
|
|---|
| 129 | SCT Temperature History Version: 3 (Unknown, should be 2)
|
|---|
| 130 | Temperature Sampling Period: 1 minute
|
|---|
| 131 | Temperature Logging Interval: 1 minute
|
|---|
| 132 | Min/Max recommended Temperature: 0/70 Celsius
|
|---|
| 133 | Min/Max Temperature Limit: 0/70 Celsius
|
|---|
| 134 | Temperature History Size (Index): 128 (9)
|
|---|
| 135 |
|
|---|
| 136 | Index Estimated Time Temperature Celsius
|
|---|
| 137 | 10 2018-10-16 08:48 ? -
|
|---|
| 138 | ... ..(116 skipped). .. -
|
|---|
| 139 | 127 2018-10-16 10:45 ? -
|
|---|
| 140 | 0 2018-10-16 10:46 21 **
|
|---|
| 141 | 1 2018-10-16 10:47 39 ********************
|
|---|
| 142 | 2 2018-10-16 10:48 43 ************************
|
|---|
| 143 | 3 2018-10-16 10:49 44 *************************
|
|---|
| 144 | 4 2018-10-16 10:50 45 **************************
|
|---|
| 145 | 5 2018-10-16 10:51 46 ***************************
|
|---|
| 146 | 6 2018-10-16 10:52 46 ***************************
|
|---|
| 147 | 7 2018-10-16 10:53 46 ***************************
|
|---|
| 148 | 8 2018-10-16 10:54 45 **************************
|
|---|
| 149 | 9 2018-10-16 10:55 46 ***************************
|
|---|
| 150 |
|
|---|
| 151 | SCT Error Recovery Control:
|
|---|
| 152 | Read: Disabled
|
|---|
| 153 | Write: Disabled
|
|---|
| 154 |
|
|---|
| 155 | Device Statistics (GP/SMART Log 0x04) not supported
|
|---|
| 156 |
|
|---|
| 157 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 158 | ID Size Value Description
|
|---|
| 159 | 0x0001 2 0 Command failed due to ICRC error
|
|---|
| 160 | 0x0002 2 0 R_ERR response for data FIS
|
|---|
| 161 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 162 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 163 | 0x0005 2 0 R_ERR response for non-data FIS
|
|---|
| 164 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 165 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 166 | 0x0008 2 0 Device-to-host non-data FIS retries
|
|---|
| 167 | 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy
|
|---|
| 168 | 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 169 | 0x000b 2 0 CRC errors within host-to-device FIS
|
|---|
| 170 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|---|
| 171 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|---|
| 172 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
|---|
| 173 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|---|
| 174 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|---|
| 175 |
|
|---|
