1 | smartctl 6.5 2016-05-07 r4318 [x86_64-linux-3.10.0-714.10.2.lve1.5.17.1.el7.x86_64] (local build) |
---|
2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org |
---|
3 | |
---|
4 | === START OF INFORMATION SECTION === |
---|
5 | Device Model: ADATA SP580 |
---|
6 | Add. Product Id: mavlsata |
---|
7 | Firmware Version: V3.10 |
---|
8 | User Capacity: 120 034 123 776 bytes [120 GB] |
---|
9 | Sector Size: 512 bytes logical/physical |
---|
10 | Rotation Rate: Solid State Device |
---|
11 | Device is: Not in smartctl database [for details use: -P showall] |
---|
12 | ATA Version is: ACS-3 T13/2161-D revision 4 |
---|
13 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) |
---|
14 | Local Time is: Wed Oct 10 13:37:15 2018 MSK |
---|
15 | SMART support is: Available - device has SMART capability. |
---|
16 | SMART support is: Enabled |
---|
17 | AAM feature is: Unavailable |
---|
18 | APM feature is: Disabled |
---|
19 | Rd look-ahead is: Enabled |
---|
20 | Write cache is: Enabled |
---|
21 | ATA Security is: Disabled, NOT FROZEN [SEC1] |
---|
22 | Wt Cache Reorder: Unavailable |
---|
23 | |
---|
24 | === START OF READ SMART DATA SECTION === |
---|
25 | SMART overall-health self-assessment test result: PASSED |
---|
26 | |
---|
27 | General SMART Values: |
---|
28 | Offline data collection status: (0x02) Offline data collection activity |
---|
29 | was completed without error. |
---|
30 | Auto Offline Data Collection: Disabled. |
---|
31 | Self-test execution status: ( 0) The previous self-test routine completed |
---|
32 | without error or no self-test has ever |
---|
33 | been run. |
---|
34 | Total time to complete Offline |
---|
35 | data collection: ( 0) seconds. |
---|
36 | Offline data collection |
---|
37 | capabilities: (0x35) SMART execute Offline immediate. |
---|
38 | No Auto Offline data collection support. |
---|
39 | Abort Offline collection upon new |
---|
40 | command. |
---|
41 | No Offline surface scan supported. |
---|
42 | Self-test supported. |
---|
43 | Conveyance Self-test supported. |
---|
44 | No Selective Self-test supported. |
---|
45 | SMART capabilities: (0x0002) Does not save SMART data before |
---|
46 | entering power-saving mode. |
---|
47 | Supports SMART auto save timer. |
---|
48 | Error logging capability: (0x00) Error logging NOT supported. |
---|
49 | General Purpose Logging supported. |
---|
50 | Short self-test routine |
---|
51 | recommended polling time: ( 1) minutes. |
---|
52 | Extended self-test routine |
---|
53 | recommended polling time: ( 1) minutes. |
---|
54 | Conveyance self-test routine |
---|
55 | recommended polling time: ( 1) minutes. |
---|
56 | |
---|
57 | SMART Attributes Data Structure revision number: 5 |
---|
58 | Vendor Specific SMART Attributes with Thresholds: |
---|
59 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
---|
60 | 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 |
---|
61 | 9 Power_On_Hours PO--CK 100 100 010 - 4843 |
---|
62 | 12 Power_Cycle_Count PO--CK 100 100 010 - 7 |
---|
63 | 161 Unknown_Attribute PO--CK 100 100 010 - 0 |
---|
64 | 164 Unknown_Attribute PO--CK 100 100 010 - 18209 |
---|
65 | 165 Unknown_Attribute PO--CK 100 100 010 - 42 |
---|
66 | 166 Unknown_Attribute PO--CK 100 100 010 - 24 |
---|
67 | 167 Unknown_Attribute PO--CK 100 100 010 - 39 |
---|
68 | 169 Unknown_Attribute PO--CK 100 100 010 - 0 |
---|
69 | 176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 |
---|
70 | 177 Wear_Leveling_Count PO--CK 100 100 010 - 0 |
---|
71 | 178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 |
---|
72 | 192 Power-Off_Retract_Count PO--CK 100 100 010 - 1 |
---|
73 | 194 Temperature_Celsius PO--CK 100 100 010 - 40 |
---|
74 | 195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 |
---|
75 | 199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 |
---|
76 | 241 Total_LBAs_Written PO--CK 100 100 010 - 12777 |
---|
77 | 242 Total_LBAs_Read PO--CK 100 100 010 - 5474 |
---|
78 | 243 Unknown_Attribute PO--CK 100 100 010 - 0 |
---|
79 | 244 Unknown_Attribute PO--CK 100 100 010 - 0 |
---|
80 | 245 Unknown_Attribute PO--CK 100 100 010 - 0 |
---|
81 | 246 Unknown_Attribute PO--CK 100 100 010 - 0 |
---|
82 | 250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 |
---|
83 | 251 Unknown_Attribute PO--CK 100 100 010 - 0 |
---|
84 | 252 Unknown_Attribute PO--CK 100 100 010 - 0 |
---|
85 | 253 Unknown_Attribute PO--CK 100 100 010 - 0 |
---|
86 | 254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 |
---|
87 | ||||||_ K auto-keep |
---|
88 | |||||__ C event count |
---|
89 | ||||___ R error rate |
---|
90 | |||____ S speed/performance |
---|
91 | ||_____ O updated online |
---|
92 | |______ P prefailure warning |
---|
93 | |
---|
94 | General Purpose Log Directory Version 1 |
---|
95 | SMART Log Directory Version 1 [multi-sector log support] |
---|
96 | Address Access R/W Size Description |
---|
97 | 0x00 GPL,SL R/O 1 Log Directory |
---|
98 | 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log |
---|
99 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log |
---|
100 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
---|
101 | |
---|
102 | SMART Extended Comprehensive Error Log (GP Log 0x03) not supported |
---|
103 | |
---|
104 | SMART Error Log not supported |
---|
105 | |
---|
106 | SMART Extended Self-test Log (GP Log 0x07) not supported |
---|
107 | |
---|
108 | SMART Self-test Log not supported |
---|
109 | |
---|
110 | Selective Self-tests/Logging not supported |
---|
111 | |
---|
112 | SCT Commands not supported |
---|
113 | |
---|
114 | Device Statistics (GP/SMART Log 0x04) not supported |
---|
115 | |
---|
116 | SATA Phy Event Counters (GP Log 0x11) not supported |
---|
117 | |
---|