| 1 | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-6-amd64] (local build)
|
|---|
| 2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: Micron_1100_MTFDDAK256TBN
|
|---|
| 6 | Serial Number: 171619E08E1D
|
|---|
| 7 | LU WWN Device Id: 5 00a075 119e08e1d
|
|---|
| 8 | Firmware Version: M0MU031
|
|---|
| 9 | User Capacity: 256,060,514,304 bytes [256 GB]
|
|---|
| 10 | Sector Size: 512 bytes logical/physical
|
|---|
| 11 | Rotation Rate: Solid State Device
|
|---|
| 12 | Form Factor: 2.5 inches
|
|---|
| 13 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 14 | ATA Version is: ACS-3 T13/2161-D revision 5
|
|---|
| 15 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
|---|
| 16 | Local Time is: Tue Sep 4 08:47:34 2018 CEST
|
|---|
| 17 | SMART support is: Available - device has SMART capability.
|
|---|
| 18 | SMART support is: Enabled
|
|---|
| 19 |
|
|---|
| 20 | === START OF READ SMART DATA SECTION ===
|
|---|
| 21 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 22 |
|
|---|
| 23 | General SMART Values:
|
|---|
| 24 | Offline data collection status: (0x04) Offline data collection activity
|
|---|
| 25 | was suspended by an interrupting command from host.
|
|---|
| 26 | Auto Offline Data Collection: Disabled.
|
|---|
| 27 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 28 | without error or no self-test has ever
|
|---|
| 29 | been run.
|
|---|
| 30 | Total time to complete Offline
|
|---|
| 31 | data collection: ( 449) seconds.
|
|---|
| 32 | Offline data collection
|
|---|
| 33 | capabilities: (0x7b) SMART execute Offline immediate.
|
|---|
| 34 | Auto Offline data collection on/off support.
|
|---|
| 35 | Suspend Offline collection upon new
|
|---|
| 36 | command.
|
|---|
| 37 | Offline surface scan supported.
|
|---|
| 38 | Self-test supported.
|
|---|
| 39 | Conveyance Self-test supported.
|
|---|
| 40 | Selective Self-test supported.
|
|---|
| 41 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 42 | power-saving mode.
|
|---|
| 43 | Supports SMART auto save timer.
|
|---|
| 44 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 45 | General Purpose Logging supported.
|
|---|
| 46 | Short self-test routine
|
|---|
| 47 | recommended polling time: ( 2) minutes.
|
|---|
| 48 | Extended self-test routine
|
|---|
| 49 | recommended polling time: ( 5) minutes.
|
|---|
| 50 | Conveyance self-test routine
|
|---|
| 51 | recommended polling time: ( 3) minutes.
|
|---|
| 52 | SCT capabilities: (0x0035) SCT Status supported.
|
|---|
| 53 | SCT Feature Control supported.
|
|---|
| 54 | SCT Data Table supported.
|
|---|
| 55 |
|
|---|
| 56 | SMART Attributes Data Structure revision number: 16
|
|---|
| 57 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 58 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|---|
| 59 | 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 0
|
|---|
| 60 | 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
|
|---|
| 61 | 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1855
|
|---|
| 62 | 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 9
|
|---|
| 63 | 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 64 | 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 65 | 173 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 4
|
|---|
| 66 | 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 6
|
|---|
| 67 | 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 68 | 184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 69 | 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 70 | 194 Temperature_Celsius 0x0022 061 049 000 Old_age Always - 39 (Min/Max 25/51)
|
|---|
| 71 | 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 72 | 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 73 | 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
|
|---|
| 74 | 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 75 | 202 Unknown_SSD_Attribute 0x0030 100 100 001 Old_age Offline - 0
|
|---|
| 76 | 206 Unknown_SSD_Attribute 0x000e 100 100 000 Old_age Always - 0
|
|---|
| 77 | 246 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 664615788
|
|---|
| 78 | 247 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 21514218
|
|---|
| 79 | 248 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 33592340
|
|---|
| 80 | 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 2055
|
|---|
| 81 | 210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 82 |
|
|---|
| 83 | SMART Error Log Version: 1
|
|---|
| 84 | No Errors Logged
|
|---|
| 85 |
|
|---|
| 86 | SMART Self-test log structure revision number 1
|
|---|
| 87 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 88 | # 1 Vendor (0xff) Completed without error 00% 1850 -
|
|---|
| 89 | # 2 Vendor (0xff) Completed without error 00% 1665 -
|
|---|
| 90 | # 3 Vendor (0xff) Completed without error 00% 1346 -
|
|---|
| 91 | # 4 Vendor (0xff) Completed without error 00% 1026 -
|
|---|
| 92 | # 5 Vendor (0xff) Completed without error 00% 676 -
|
|---|
| 93 | # 6 Vendor (0xff) Completed without error 00% 341 -
|
|---|
| 94 | # 7 Offline Completed without error 00% 222 -
|
|---|
| 95 | # 8 Vendor (0xff) Completed without error 00% 173 -
|
|---|
| 96 | # 9 Extended offline Completed without error 00% 55 -
|
|---|
| 97 | #10 Extended offline Completed without error 00% 35 -
|
|---|
| 98 | #11 Extended offline Completed without error 00% 13 -
|
|---|
| 99 | #12 Extended offline Completed without error 00% 12 -
|
|---|
| 100 | #13 Extended offline Completed without error 00% 0 -
|
|---|
| 101 |
|
|---|
| 102 | SMART Selective self-test log data structure revision number 1
|
|---|
| 103 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 104 | 1 0 0 Not_testing
|
|---|
| 105 | 2 0 0 Not_testing
|
|---|
| 106 | 3 0 0 Not_testing
|
|---|
| 107 | 4 0 0 Not_testing
|
|---|
| 108 | 5 0 0 Not_testing
|
|---|
| 109 | Selective self-test flags (0x0):
|
|---|
| 110 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 111 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
