Ticket #1074: smartctl-WDC_WD10JMVW-11AJGS4-unknown-usb-id.txt

File smartctl-WDC_WD10JMVW-11AJGS4-unknown-usb-id.txt, 4.9 KB (added by Gabriele Pohl, 13 months ago)

smartctl report

Line 
1smartctl 6.6 2016-05-31 r4324 [armv7l-linux-4.9.59-v7+] (local build)
2Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
3
4/dev/sda: Unknown USB bridge [0x1058:0x25a0 (0x1004)]
5Please specify device type with the -d option.
6
7Use smartctl -h to get a usage summary
8
9david@pi:~$ sudo smartctl /dev/sda -d sat -q noserial -a
10smartctl 6.6 2016-05-31 r4324 [armv7l-linux-4.9.59-v7+] (local build)
11Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
12
13=== START OF INFORMATION SECTION ===
14Model Family:     Western Digital Elements / My Passport (USB, AF)
15Device Model:     WDC WD10JMVW-11AJGS4
16Firmware Version: 01.01A01
17User Capacity:    1.000.204.886.016 bytes [1,00 TB]
18Sector Sizes:     512 bytes logical, 4096 bytes physical
19Rotation Rate:    5400 rpm
20Device is:        In smartctl database [for details use: -P show]
21ATA Version is:   ACS-2 (minor revision not indicated)
22SATA Version is:  SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
23Local Time is:    Tue Mar  6 00:07:13 2018 CET
24SMART support is: Available - device has SMART capability.
25SMART support is: Enabled
26
27=== START OF READ SMART DATA SECTION ===
28SMART Status not supported: Incomplete response, ATA output registers missing
29SMART overall-health self-assessment test result: PASSED
30Warning: This result is based on an Attribute check.
31
32General SMART Values:
33Offline data collection status:  (0x00) Offline data collection activity
34                                        was never started.
35                                        Auto Offline Data Collection: Disabled.
36Self-test execution status:      (   0) The previous self-test routine completed
37                                        without error or no self-test has ever
38                                        been run.
39Total time to complete Offline
40data collection:                (17820) seconds.
41Offline data collection
42capabilities:                    (0x7b) SMART execute Offline immediate.
43                                        Auto Offline data collection on/off support.
44                                        Suspend Offline collection upon new
45                                        command.
46                                        Offline surface scan supported.
47                                        Self-test supported.
48                                        Conveyance Self-test supported.
49                                        Selective Self-test supported.
50SMART capabilities:            (0x0003) Saves SMART data before entering
51                                        power-saving mode.
52                                        Supports SMART auto save timer.
53Error logging capability:        (0x01) Error logging supported.
54                                        General Purpose Logging supported.
55Short self-test routine
56recommended polling time:        (   2) minutes.
57Extended self-test routine
58recommended polling time:        ( 200) minutes.
59Conveyance self-test routine
60recommended polling time:        (   5) minutes.
61SCT capabilities:              (0x7035) SCT Status supported.
62                                        SCT Feature Control supported.
63                                        SCT Data Table supported.
64
65SMART Attributes Data Structure revision number: 16
66Vendor Specific SMART Attributes with Thresholds:
67ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
68  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
69  3 Spin_Up_Time            0x0027   135   133   021    Pre-fail  Always       -       4233
70  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       551
71  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
72  7 Seek_Error_Rate         0x002e   100   253   000    Old_age   Always       -       0
73  9 Power_On_Hours          0x0032   086   086   000    Old_age   Always       -       10386
74 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
75 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
76 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       13
77192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       3
78193 Load_Cycle_Count        0x0032   199   199   000    Old_age   Always       -       5405
79194 Temperature_Celsius     0x0022   108   100   000    Old_age   Always       -       39
80196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
81197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
82198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
83199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
84200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0
85
86SMART Error Log Version: 1
87No Errors Logged
88
89SMART Self-test log structure revision number 1
90No self-tests have been logged.  [To run self-tests, use: smartctl -t]
91
92SMART Selective self-test log data structure revision number 1
93 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
94    1        0        0  Not_testing
95    2        0        0  Not_testing
96    3        0        0  Not_testing
97    4        0        0  Not_testing
98    5        0        0  Not_testing
99Selective self-test flags (0x0):
100  After scanning selected spans, do NOT read-scan remainder of disk.
101If Selective self-test is pending on power-up, resume after 0 minute delay.