1 | smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.13.0-39-generic] (local build) |
---|
2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org |
---|
3 | |
---|
4 | === START OF INFORMATION SECTION === |
---|
5 | Device Model: WDC WDS120G2G0A-00JH30 |
---|
6 | Serial Number: 180422801799 |
---|
7 | LU WWN Device Id: 5 001b44 8b651a207 |
---|
8 | Firmware Version: UE360000 |
---|
9 | User Capacity: 120,040,980,480 bytes [120 GB] |
---|
10 | Sector Size: 512 bytes logical/physical |
---|
11 | Rotation Rate: Solid State Device |
---|
12 | Form Factor: 2.5 inches |
---|
13 | Device is: Not in smartctl database [for details use: -P showall] |
---|
14 | ATA Version is: ACS-2 T13/2015-D revision 3 |
---|
15 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s) |
---|
16 | Local Time is: Sun Apr 29 09:26:44 2018 CEST |
---|
17 | SMART support is: Available - device has SMART capability. |
---|
18 | SMART support is: Enabled |
---|
19 | AAM feature is: Unavailable |
---|
20 | APM level is: 254 (maximum performance) |
---|
21 | Rd look-ahead is: Enabled |
---|
22 | Write cache is: Enabled |
---|
23 | ATA Security is: Disabled, NOT FROZEN [SEC1] |
---|
24 | Wt Cache Reorder: Unavailable |
---|
25 | |
---|
26 | === START OF READ SMART DATA SECTION === |
---|
27 | SMART overall-health self-assessment test result: PASSED |
---|
28 | |
---|
29 | General SMART Values: |
---|
30 | Offline data collection status: (0x00) Offline data collection activity |
---|
31 | was never started. |
---|
32 | Auto Offline Data Collection: Disabled. |
---|
33 | Self-test execution status: ( 32) The self-test routine was interrupted |
---|
34 | by the host with a hard or soft reset. |
---|
35 | Total time to complete Offline |
---|
36 | data collection: ( 120) seconds. |
---|
37 | Offline data collection |
---|
38 | capabilities: (0x15) SMART execute Offline immediate. |
---|
39 | No Auto Offline data collection support. |
---|
40 | Abort Offline collection upon new |
---|
41 | command. |
---|
42 | No Offline surface scan supported. |
---|
43 | Self-test supported. |
---|
44 | No Conveyance Self-test supported. |
---|
45 | No Selective Self-test supported. |
---|
46 | SMART capabilities: (0x0003) Saves SMART data before entering |
---|
47 | power-saving mode. |
---|
48 | Supports SMART auto save timer. |
---|
49 | Error logging capability: (0x01) Error logging supported. |
---|
50 | General Purpose Logging supported. |
---|
51 | Short self-test routine |
---|
52 | recommended polling time: ( 2) minutes. |
---|
53 | Extended self-test routine |
---|
54 | recommended polling time: ( 21) minutes. |
---|
55 | |
---|
56 | SMART Attributes Data Structure revision number: 1 |
---|
57 | Vendor Specific SMART Attributes with Thresholds: |
---|
58 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
---|
59 | 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 |
---|
60 | 9 Power_On_Hours -O--CK 100 100 000 - 1 |
---|
61 | 12 Power_Cycle_Count -O--CK 100 100 000 - 2 |
---|
62 | 165 Unknown_Attribute -O--CK 100 100 000 - 0 |
---|
63 | 166 Unknown_Attribute -O--CK 100 100 --- - 0 |
---|
64 | 167 Unknown_Attribute -O--CK 100 100 --- - 0 |
---|
65 | 168 Unknown_Attribute -O--CK 100 100 --- - 0 |
---|
66 | 169 Unknown_Attribute -O--CK 100 100 --- - 97 |
---|
67 | 170 Unknown_Attribute -O--CK 100 100 --- - 0 |
---|
68 | 171 Unknown_Attribute -O--CK 100 100 000 - 0 |
---|
69 | 172 Unknown_Attribute -O--CK 100 100 000 - 0 |
---|
70 | 173 Unknown_Attribute -O--CK 100 100 000 - 0 |
---|
71 | 174 Unknown_Attribute -O--CK 100 100 000 - 0 |
---|
72 | 184 End-to-End_Error -O--CK 100 100 --- - 0 |
---|
73 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0 |
---|
74 | 188 Command_Timeout -O--CK 100 100 --- - 0 |
---|
75 | 194 Temperature_Celsius -O---K 066 050 000 - 34 (Min/Max 21/50) |
---|
76 | 199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 |
---|
77 | 230 Unknown_SSD_Attribute -O--CK 100 100 000 - 0 |
---|
78 | 232 Available_Reservd_Space PO--CK 100 100 005 - 100 |
---|
79 | 233 Media_Wearout_Indicator -O--CK 100 100 --- - 0 |
---|
80 | 234 Unknown_Attribute -O--CK 100 100 000 - 0 |
---|
81 | 241 Total_LBAs_Written ----CK 100 100 000 - 0 |
---|
82 | 242 Total_LBAs_Read ----CK 100 100 000 - 0 |
---|
83 | 244 Unknown_Attribute -O--CK 000 100 --- - 0 |
---|
84 | ||||||_ K auto-keep |
---|
85 | |||||__ C event count |
---|
86 | ||||___ R error rate |
---|
87 | |||____ S speed/performance |
---|
88 | ||_____ O updated online |
---|
89 | |______ P prefailure warning |
---|
90 | |
---|
91 | General Purpose Log Directory Version 1 |
---|
92 | SMART Log Directory Version 1 [multi-sector log support] |
---|
93 | Address Access R/W Size Description |
---|
94 | 0x00 GPL,SL R/O 1 Log Directory |
---|
95 | 0x01 SL R/O 1 Summary SMART error log |
---|
96 | 0x02 SL R/O 1 Comprehensive SMART error log |
---|
97 | 0x03 GPL R/O 16 Ext. Comprehensive SMART error log |
---|
98 | 0x04 GPL,SL R/O 8 Device Statistics log |
---|
99 | 0x06 SL R/O 1 SMART self-test log |
---|
100 | 0x07 GPL R/O 1 Extended self-test log |
---|
101 | 0x10 GPL R/O 1 SATA NCQ Queued Error log |
---|
102 | 0x11 GPL R/O 1 SATA Phy Event Counters log |
---|
103 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log |
---|
104 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
---|
105 | 0xa1 GPL,SL VS 1 Device vendor specific log |
---|
106 | 0xa2 GPL,SL VS 2 Device vendor specific log |
---|
107 | 0xa3 GPL,SL VS 1 Device vendor specific log |
---|
108 | 0xa7 GPL,SL VS 1 Device vendor specific log |
---|
109 | 0xa9 GPL,SL VS 3 Device vendor specific log |
---|
110 | |
---|
111 | Warning! SMART Extended Comprehensive Error Log Structure error: invalid SMART checksum. |
---|
112 | SMART Extended Comprehensive Error Log Version: 1 (16 sectors) |
---|
113 | No Errors Logged |
---|
114 | |
---|
115 | SMART Extended Self-test Log Version: 1 (1 sectors) |
---|
116 | No self-tests have been logged. [To run self-tests, use: smartctl -t] |
---|
117 | |
---|
118 | Selective Self-tests/Logging not supported |
---|
119 | |
---|
120 | SCT Commands not supported |
---|
121 | |
---|
122 | Device Statistics (GP Log 0x04) |
---|
123 | Page Offset Size Value Flags Description |
---|
124 | 0x01 ===== = = === == General Statistics (rev 1) == |
---|
125 | 0x01 0x008 4 2 --- Lifetime Power-On Resets |
---|
126 | 0x01 0x010 4 1 --- Power-on Hours |
---|
127 | 0x01 0x018 6 0 --- Logical Sectors Written |
---|
128 | 0x01 0x028 6 10158 --- Logical Sectors Read |
---|
129 | 0x01 0x038 6 1 --- Date and Time TimeStamp |
---|
130 | 0x05 ===== = = === == Temperature Statistics (rev 1) == |
---|
131 | 0x05 0x008 1 34 --- Current Temperature |
---|
132 | 0x05 0x010 1 - --- Average Short Term Temperature |
---|
133 | 0x05 0x018 1 - --- Average Long Term Temperature |
---|
134 | 0x05 0x020 1 49 --- Highest Temperature |
---|
135 | 0x05 0x028 1 35 --- Lowest Temperature |
---|
136 | 0x05 0x030 1 - --- Highest Average Short Term Temperature |
---|
137 | 0x05 0x038 1 - --- Lowest Average Short Term Temperature |
---|
138 | 0x05 0x040 1 - --- Highest Average Long Term Temperature |
---|
139 | 0x05 0x048 1 - --- Lowest Average Long Term Temperature |
---|
140 | 0x05 0x050 4 0 --- Time in Over-Temperature |
---|
141 | 0x05 0x058 1 95 --- Specified Maximum Operating Temperature |
---|
142 | 0x05 0x060 4 0 --- Time in Under-Temperature |
---|
143 | 0x05 0x068 1 0 --- Specified Minimum Operating Temperature |
---|
144 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) == |
---|
145 | 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |
---|
146 | |||_ C monitored condition met |
---|
147 | ||__ D supports DSN |
---|
148 | |___ N normalized value |
---|
149 | |
---|
150 | SATA Phy Event Counters (GP Log 0x11) |
---|
151 | ID Size Value Description |
---|
152 | 0x0003 2 0 R_ERR response for device-to-host data FIS |
---|
153 | 0x0004 2 0 R_ERR response for host-to-device data FIS |
---|
154 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS |
---|
155 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
---|
156 | 0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy |
---|
157 | 0x000a 2 12 Device-to-host register FISes sent due to a COMRESET |
---|
158 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC |
---|
159 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC |
---|
160 | 0x0001 2 0 Command failed due to ICRC error |
---|
161 | |
---|