| 1 | smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.14.52-gentoo-apu2v2] (local build) |
|---|
| 2 | Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org |
|---|
| 3 | |
|---|
| 4 | === START OF INFORMATION SECTION === |
|---|
| 5 | Device Model: Samsung SSD 860 EVO mSATA 250GB |
|---|
| 6 | Serial Number: |
|---|
| 7 | LU WWN Device Id: |
|---|
| 8 | Firmware Version: RVT41B6Q |
|---|
| 9 | User Capacity: 250,059,350,016 bytes [250 GB] |
|---|
| 10 | Sector Size: 512 bytes logical/physical |
|---|
| 11 | Rotation Rate: Solid State Device |
|---|
| 12 | Form Factor: mSATA |
|---|
| 13 | Device is: Not in smartctl database [for details use: -P showall] |
|---|
| 14 | ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 |
|---|
| 15 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) |
|---|
| 16 | Local Time is: Sat Jul 28 11:12:03 2018 CEST |
|---|
| 17 | SMART support is: Available - device has SMART capability. |
|---|
| 18 | SMART support is: Enabled |
|---|
| 19 | AAM feature is: Unavailable |
|---|
| 20 | APM feature is: Unavailable |
|---|
| 21 | Rd look-ahead is: Enabled |
|---|
| 22 | Write cache is: Enabled |
|---|
| 23 | DSN feature is: Unavailable |
|---|
| 24 | ATA Security is: Disabled, NOT FROZEN [SEC1] |
|---|
| 25 | Wt Cache Reorder: Enabled |
|---|
| 26 | |
|---|
| 27 | === START OF READ SMART DATA SECTION === |
|---|
| 28 | SMART overall-health self-assessment test result: PASSED |
|---|
| 29 | |
|---|
| 30 | General SMART Values: |
|---|
| 31 | Offline data collection status: (0x80) Offline data collection activity |
|---|
| 32 | was never started. |
|---|
| 33 | Auto Offline Data Collection: Enabled. |
|---|
| 34 | Self-test execution status: ( 0) The previous self-test routine completed |
|---|
| 35 | without error or no self-test has ever |
|---|
| 36 | been run. |
|---|
| 37 | Total time to complete Offline |
|---|
| 38 | data collection: ( 0) seconds. |
|---|
| 39 | Offline data collection |
|---|
| 40 | capabilities: (0x53) SMART execute Offline immediate. |
|---|
| 41 | Auto Offline data collection on/off support. |
|---|
| 42 | Suspend Offline collection upon new |
|---|
| 43 | command. |
|---|
| 44 | No Offline surface scan supported. |
|---|
| 45 | Self-test supported. |
|---|
| 46 | No Conveyance Self-test supported. |
|---|
| 47 | Selective Self-test supported. |
|---|
| 48 | SMART capabilities: (0x0003) Saves SMART data before entering |
|---|
| 49 | power-saving mode. |
|---|
| 50 | Supports SMART auto save timer. |
|---|
| 51 | Error logging capability: (0x01) Error logging supported. |
|---|
| 52 | General Purpose Logging supported. |
|---|
| 53 | Short self-test routine |
|---|
| 54 | recommended polling time: ( 2) minutes. |
|---|
| 55 | Extended self-test routine |
|---|
| 56 | recommended polling time: ( 85) minutes. |
|---|
| 57 | SCT capabilities: (0x003d) SCT Status supported. |
|---|
| 58 | SCT Error Recovery Control supported. |
|---|
| 59 | SCT Feature Control supported. |
|---|
| 60 | SCT Data Table supported. |
|---|
| 61 | |
|---|
| 62 | SMART Attributes Data Structure revision number: 1 |
|---|
| 63 | Vendor Specific SMART Attributes with Thresholds: |
|---|
| 64 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
|---|
| 65 | 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 |
|---|
| 66 | 9 Power_On_Hours -O--CK 099 099 000 - 3641 |
|---|
| 67 | 12 Power_Cycle_Count -O--CK 099 099 000 - 62 |
|---|
| 68 | 177 Wear_Leveling_Count PO--C- 099 099 000 - 1 |
|---|
| 69 | 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 |
|---|
| 70 | 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 |
|---|
| 71 | 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 |
|---|
| 72 | 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 |
|---|
| 73 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0 |
|---|
| 74 | 190 Airflow_Temperature_Cel -O--CK 063 042 000 - 37 |
|---|
| 75 | 195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0 |
|---|
| 76 | 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 |
|---|
| 77 | 235 Unknown_Attribute -O--C- 099 099 000 - 44 |
|---|
| 78 | 241 Total_LBAs_Written -O--CK 099 099 000 - 1555689982 |
|---|
| 79 | ||||||_ K auto-keep |
|---|
| 80 | |||||__ C event count |
|---|
| 81 | ||||___ R error rate |
|---|
| 82 | |||____ S speed/performance |
|---|
| 83 | ||_____ O updated online |
|---|
| 84 | |______ P prefailure warning |
|---|
| 85 | |
|---|
| 86 | General Purpose Log Directory Version 1 |
|---|
| 87 | SMART Log Directory Version 1 [multi-sector log support] |
|---|
| 88 | Address Access R/W Size Description |
|---|
| 89 | 0x00 GPL,SL R/O 1 Log Directory |
|---|
| 90 | 0x01 SL R/O 1 Summary SMART error log |
|---|
| 91 | 0x02 SL R/O 1 Comprehensive SMART error log |
|---|
| 92 | 0x03 GPL R/O 1 Ext. Comprehensive SMART error log |
|---|
| 93 | 0x04 GPL,SL R/O 8 Device Statistics log |
|---|
| 94 | 0x06 SL R/O 1 SMART self-test log |
|---|
| 95 | 0x07 GPL R/O 1 Extended self-test log |
|---|
| 96 | 0x09 SL R/W 1 Selective self-test log |
|---|
| 97 | 0x10 GPL R/O 1 NCQ Command Error log |
|---|
| 98 | 0x11 GPL R/O 1 SATA Phy Event Counters log |
|---|
| 99 | 0x13 GPL R/O 1 SATA NCQ Send and Receive log |
|---|
| 100 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log |
|---|
| 101 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
|---|
| 102 | 0xa1 SL VS 16 Device vendor specific log |
|---|
| 103 | 0xa5 SL VS 16 Device vendor specific log |
|---|
| 104 | 0xce-0xcf SL VS 16 Device vendor specific log |
|---|
| 105 | 0xe0 GPL,SL R/W 1 SCT Command/Status |
|---|
| 106 | 0xe1 GPL,SL R/W 1 SCT Data Transfer |
|---|
| 107 | |
|---|
| 108 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors) |
|---|
| 109 | No Errors Logged |
|---|
| 110 | |
|---|
| 111 | SMART Extended Self-test Log Version: 1 (1 sectors) |
|---|
| 112 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
|---|
| 113 | # 1 Short offline Completed without error 00% 3641 - |
|---|
| 114 | # 2 Extended offline Completed without error 00% 3635 - |
|---|
| 115 | # 3 Short offline Completed without error 00% 3632 - |
|---|
| 116 | # 4 Short offline Completed without error 00% 3608 - |
|---|
| 117 | # 5 Short offline Completed without error 00% 3584 - |
|---|
| 118 | # 6 Short offline Completed without error 00% 3560 - |
|---|
| 119 | # 7 Short offline Completed without error 00% 3536 - |
|---|
| 120 | # 8 Short offline Completed without error 00% 3512 - |
|---|
| 121 | # 9 Short offline Completed without error 00% 3488 - |
|---|
| 122 | #10 Extended offline Completed without error 00% 3467 - |
|---|
| 123 | #11 Short offline Completed without error 00% 3464 - |
|---|
| 124 | #12 Short offline Completed without error 00% 3440 - |
|---|
| 125 | #13 Short offline Completed without error 00% 3416 - |
|---|
| 126 | #14 Short offline Completed without error 00% 3392 - |
|---|
| 127 | #15 Short offline Completed without error 00% 3368 - |
|---|
| 128 | #16 Short offline Completed without error 00% 3344 - |
|---|
| 129 | #17 Short offline Completed without error 00% 3320 - |
|---|
| 130 | #18 Extended offline Completed without error 00% 3299 - |
|---|
| 131 | #19 Short offline Completed without error 00% 3296 - |
|---|
| 132 | |
|---|
| 133 | SMART Selective self-test log data structure revision number 1 |
|---|
| 134 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
|---|
| 135 | 1 0 0 Not_testing |
|---|
| 136 | 2 0 0 Not_testing |
|---|
| 137 | 3 0 0 Not_testing |
|---|
| 138 | 4 0 0 Not_testing |
|---|
| 139 | 5 0 0 Not_testing |
|---|
| 140 | Selective self-test flags (0x0): |
|---|
| 141 | After scanning selected spans, do NOT read-scan remainder of disk. |
|---|
| 142 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
|---|
| 143 | |
|---|
| 144 | SCT Status Version: 3 |
|---|
| 145 | SCT Version (vendor specific): 256 (0x0100) |
|---|
| 146 | SCT Support Level: 1 |
|---|
| 147 | Device State: Active (0) |
|---|
| 148 | Current Temperature: 37 Celsius |
|---|
| 149 | Power Cycle Min/Max Temperature: 34/58 Celsius |
|---|
| 150 | Lifetime Min/Max Temperature: 27/58 Celsius |
|---|
| 151 | Under/Over Temperature Limit Count: 0/0 |
|---|
| 152 | |
|---|
| 153 | SCT Temperature History Version: 2 |
|---|
| 154 | Temperature Sampling Period: 1 minute |
|---|
| 155 | Temperature Logging Interval: 10 minutes |
|---|
| 156 | Min/Max recommended Temperature: 0/70 Celsius |
|---|
| 157 | Min/Max Temperature Limit: 0/70 Celsius |
|---|
| 158 | Temperature History Size (Index): 128 (101) |
|---|
| 159 | |
|---|
| 160 | Index Estimated Time Temperature Celsius |
|---|
| 161 | 102 2018-07-27 14:00 41 ********************** |
|---|
| 162 | ... ..( 26 skipped). .. ********************** |
|---|
| 163 | 1 2018-07-27 18:30 41 ********************** |
|---|
| 164 | 2 2018-07-27 18:40 40 ********************* |
|---|
| 165 | 3 2018-07-27 18:50 41 ********************** |
|---|
| 166 | 4 2018-07-27 19:00 41 ********************** |
|---|
| 167 | 5 2018-07-27 19:10 40 ********************* |
|---|
| 168 | ... ..( 3 skipped). .. ********************* |
|---|
| 169 | 9 2018-07-27 19:50 40 ********************* |
|---|
| 170 | 10 2018-07-27 20:00 41 ********************** |
|---|
| 171 | 11 2018-07-27 20:10 40 ********************* |
|---|
| 172 | ... ..( 6 skipped). .. ********************* |
|---|
| 173 | 18 2018-07-27 21:20 40 ********************* |
|---|
| 174 | 19 2018-07-27 21:30 41 ********************** |
|---|
| 175 | 20 2018-07-27 21:40 40 ********************* |
|---|
| 176 | ... ..( 26 skipped). .. ********************* |
|---|
| 177 | 47 2018-07-28 02:10 40 ********************* |
|---|
| 178 | 48 2018-07-28 02:20 42 *********************** |
|---|
| 179 | 49 2018-07-28 02:30 40 ********************* |
|---|
| 180 | ... ..( 3 skipped). .. ********************* |
|---|
| 181 | 53 2018-07-28 03:10 40 ********************* |
|---|
| 182 | 54 2018-07-28 03:20 58 *************************************** |
|---|
| 183 | 55 2018-07-28 03:30 57 ************************************** |
|---|
| 184 | 56 2018-07-28 03:40 58 *************************************** |
|---|
| 185 | ... ..( 4 skipped). .. *************************************** |
|---|
| 186 | 61 2018-07-28 04:30 58 *************************************** |
|---|
| 187 | 62 2018-07-28 04:40 48 ***************************** |
|---|
| 188 | 63 2018-07-28 04:50 41 ********************** |
|---|
| 189 | ... ..( 2 skipped). .. ********************** |
|---|
| 190 | 66 2018-07-28 05:20 41 ********************** |
|---|
| 191 | 67 2018-07-28 05:30 40 ********************* |
|---|
| 192 | ... ..( 22 skipped). .. ********************* |
|---|
| 193 | 90 2018-07-28 09:20 40 ********************* |
|---|
| 194 | 91 2018-07-28 09:30 41 ********************** |
|---|
| 195 | ... ..( 3 skipped). .. ********************** |
|---|
| 196 | 95 2018-07-28 10:10 41 ********************** |
|---|
| 197 | 96 2018-07-28 10:20 38 ******************* |
|---|
| 198 | 97 2018-07-28 10:30 38 ******************* |
|---|
| 199 | 98 2018-07-28 10:40 37 ****************** |
|---|
| 200 | 99 2018-07-28 10:50 38 ******************* |
|---|
| 201 | 100 2018-07-28 11:00 38 ******************* |
|---|
| 202 | 101 2018-07-28 11:10 37 ****************** |
|---|
| 203 | |
|---|
| 204 | SCT Error Recovery Control: |
|---|
| 205 | Read: Disabled |
|---|
| 206 | Write: Disabled |
|---|
| 207 | |
|---|
| 208 | Device Statistics (GP Log 0x04) |
|---|
| 209 | Page Offset Size Value Flags Description |
|---|
| 210 | 0x01 ===== = = === == General Statistics (rev 1) == |
|---|
| 211 | 0x01 0x008 4 62 --- Lifetime Power-On Resets |
|---|
| 212 | 0x01 0x010 4 3641 --- Power-on Hours |
|---|
| 213 | 0x01 0x018 6 1555689982 --- Logical Sectors Written |
|---|
| 214 | 0x01 0x020 6 44976513 --- Number of Write Commands |
|---|
| 215 | 0x01 0x028 6 344183088 --- Logical Sectors Read |
|---|
| 216 | 0x01 0x030 6 12658102 --- Number of Read Commands |
|---|
| 217 | 0x01 0x038 6 2897000 --- Date and Time TimeStamp |
|---|
| 218 | 0x04 ===== = = === == General Errors Statistics (rev 1) == |
|---|
| 219 | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors |
|---|
| 220 | 0x04 0x010 4 30 --- Resets Between Cmd Acceptance and Completion |
|---|
| 221 | 0x05 ===== = = === == Temperature Statistics (rev 1) == |
|---|
| 222 | 0x05 0x008 1 37 --- Current Temperature |
|---|
| 223 | 0x05 0x020 1 58 --- Highest Temperature |
|---|
| 224 | 0x05 0x028 1 27 --- Lowest Temperature |
|---|
| 225 | 0x05 0x058 1 55 --- Specified Maximum Operating Temperature |
|---|
| 226 | 0x06 ===== = = === == Transport Statistics (rev 1) == |
|---|
| 227 | 0x06 0x008 4 4753 --- Number of Hardware Resets |
|---|
| 228 | 0x06 0x010 4 0 --- Number of ASR Events |
|---|
| 229 | 0x06 0x018 4 0 --- Number of Interface CRC Errors |
|---|
| 230 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) == |
|---|
| 231 | 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |
|---|
| 232 | |||_ C monitored condition met |
|---|
| 233 | ||__ D supports DSN |
|---|
| 234 | |___ N normalized value |
|---|
| 235 | |
|---|
| 236 | Pending Defects log (GP Log 0x0c) not supported |
|---|
| 237 | |
|---|
| 238 | SATA Phy Event Counters (GP Log 0x11) |
|---|
| 239 | ID Size Value Description |
|---|
| 240 | 0x0001 2 0 Command failed due to ICRC error |
|---|
| 241 | 0x0002 2 0 R_ERR response for data FIS |
|---|
| 242 | 0x0003 2 0 R_ERR response for device-to-host data FIS |
|---|
| 243 | 0x0004 2 0 R_ERR response for host-to-device data FIS |
|---|
| 244 | 0x0005 2 0 R_ERR response for non-data FIS |
|---|
| 245 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS |
|---|
| 246 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
|---|
| 247 | 0x0008 2 0 Device-to-host non-data FIS retries |
|---|
| 248 | 0x0009 2 3735 Transition from drive PhyRdy to drive PhyNRdy |
|---|
| 249 | 0x000a 2 18 Device-to-host register FISes sent due to a COMRESET |
|---|
| 250 | 0x000b 2 0 CRC errors within host-to-device FIS |
|---|
| 251 | 0x000d 2 0 Non-CRC errors within host-to-device FIS |
|---|
| 252 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC |
|---|
| 253 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC |
|---|
| 254 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC |
|---|
| 255 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC |
|---|
| 256 | |
|---|
