1 | smartctl 6.6 2016-05-31 r4324 [armv7l-linux-4.14.53-bpi-r2-shorewall] (local build)
|
---|
2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Device Model: INTENSO
|
---|
6 | Firmware Version: SAFM01.6
|
---|
7 | User Capacity: 256.060.514.304 bytes [256 GB]
|
---|
8 | Sector Size: 512 bytes logical/physical
|
---|
9 | Rotation Rate: Solid State Device
|
---|
10 | Form Factor: 2.5 inches
|
---|
11 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
12 | ATA Version is: ACS-2 (minor revision not indicated)
|
---|
13 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
---|
14 | Local Time is: Sun Jul 15 09:50:21 2018 CEST
|
---|
15 | SMART support is: Available - device has SMART capability.
|
---|
16 | SMART support is: Enabled
|
---|
17 | AAM feature is: Unavailable
|
---|
18 | APM level is: 254 (maximum performance)
|
---|
19 | Rd look-ahead is: Enabled
|
---|
20 | Write cache is: Enabled
|
---|
21 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
---|
22 | Wt Cache Reorder: Unavailable
|
---|
23 |
|
---|
24 | === START OF READ SMART DATA SECTION ===
|
---|
25 | SMART overall-health self-assessment test result: PASSED
|
---|
26 | See vendor-specific Attribute list for marginal Attributes.
|
---|
27 |
|
---|
28 | General SMART Values:
|
---|
29 | Offline data collection status: (0x00) Offline data collection activity
|
---|
30 | was never started.
|
---|
31 | Auto Offline Data Collection: Disabled.
|
---|
32 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
33 | without error or no self-test has ever
|
---|
34 | been run.
|
---|
35 | Total time to complete Offline
|
---|
36 | data collection: ( 30) seconds.
|
---|
37 | Offline data collection
|
---|
38 | capabilities: (0x79) SMART execute Offline immediate.
|
---|
39 | No Auto Offline data collection support.
|
---|
40 | Suspend Offline collection upon new
|
---|
41 | command.
|
---|
42 | Offline surface scan supported.
|
---|
43 | Self-test supported.
|
---|
44 | Conveyance Self-test supported.
|
---|
45 | Selective Self-test supported.
|
---|
46 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
47 | power-saving mode.
|
---|
48 | Supports SMART auto save timer.
|
---|
49 | Error logging capability: (0x01) Error logging supported.
|
---|
50 | General Purpose Logging supported.
|
---|
51 | Short self-test routine
|
---|
52 | recommended polling time: ( 1) minutes.
|
---|
53 | Extended self-test routine
|
---|
54 | recommended polling time: ( 2) minutes.
|
---|
55 | Conveyance self-test routine
|
---|
56 | recommended polling time: ( 3) minutes.
|
---|
57 |
|
---|
58 | SMART Attributes Data Structure revision number: 16
|
---|
59 | Vendor Specific SMART Attributes with Thresholds:
|
---|
60 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
61 | 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
|
---|
62 | 9 Power_On_Hours -O--C- 100 100 000 - 12876
|
---|
63 | 12 Power_Cycle_Count -O--C- 100 100 000 - 335
|
---|
64 | 168 Unknown_Attribute -O--C- 100 100 000 - 114
|
---|
65 | 170 Unknown_Attribute PO---- 000 000 010 NOW 81604379423
|
---|
66 | 173 Unknown_Attribute -O--C- 100 100 000 - 720979
|
---|
67 | 192 Power-Off_Retract_Count -O--C- 100 100 000 - 143
|
---|
68 | 194 Temperature_Celsius PO---K 070 070 030 - 30 (Min/Max 29/30)
|
---|
69 | 218 Unknown_Attribute PO-R-- 100 100 050 - 55
|
---|
70 | 231 Temperature_Celsius PO--C- 100 100 000 - 100
|
---|
71 | 241 Total_LBAs_Written -O--C- 100 100 000 - 2578
|
---|
72 | ||||||_ K auto-keep
|
---|
73 | |||||__ C event count
|
---|
74 | ||||___ R error rate
|
---|
75 | |||____ S speed/performance
|
---|
76 | ||_____ O updated online
|
---|
77 | |______ P prefailure warning
|
---|
78 |
|
---|
79 | General Purpose Log Directory Version 1
|
---|
80 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
81 | Address Access R/W Size Description
|
---|
82 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
83 | 0x01 SL R/O 1 Summary SMART error log
|
---|
84 | 0x02 SL R/O 51 Comprehensive SMART error log
|
---|
85 | 0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
---|
86 | 0x04 GPL,SL R/O 6 Device Statistics log
|
---|
87 | 0x06 SL R/O 1 SMART self-test log
|
---|
88 | 0x07 GPL R/O 1 Extended self-test log
|
---|
89 | 0x09 SL R/W 1 Selective self-test log
|
---|
90 | 0x10 GPL R/O 1 SATA NCQ Queued Error log
|
---|
91 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
---|
92 | 0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log
|
---|
93 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
94 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
---|
95 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
---|
96 |
|
---|
97 | SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
---|
98 | No Errors Logged
|
---|
99 |
|
---|
100 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
101 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
102 | # 1 Extended offline Completed without error 00% 12876 -
|
---|
103 | # 2 Short offline Completed without error 00% 12646 -
|
---|
104 |
|
---|
105 | SMART Selective self-test log data structure revision number 1
|
---|
106 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
107 | 1 0 0 Not_testing
|
---|
108 | 2 0 0 Not_testing
|
---|
109 | 3 0 0 Not_testing
|
---|
110 | 4 0 0 Not_testing
|
---|
111 | 5 0 0 Not_testing
|
---|
112 | Selective self-test flags (0x0):
|
---|
113 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
114 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
115 |
|
---|
116 | SCT Commands not supported
|
---|
117 |
|
---|
118 | Device Statistics (GP Log 0x04)
|
---|
119 | Page Offset Size Value Flags Description
|
---|
120 | 0x01 ===== = = === == General Statistics (rev 2) ==
|
---|
121 | 0x01 0x008 4 335 --- Lifetime Power-On Resets
|
---|
122 | 0x01 0x018 6 5408542494 --- Logical Sectors Written
|
---|
123 | 0x01 0x020 6 11187249 --- Number of Write Commands
|
---|
124 | 0x01 0x028 6 504444845 --- Logical Sectors Read
|
---|
125 | 0x01 0x030 6 7519867 --- Number of Read Commands
|
---|
126 | 0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
---|
127 | 0x04 0x008 4 127361 --- Number of Reported Uncorrectable Errors
|
---|
128 | 0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion
|
---|
129 | 0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
---|
130 | 0x05 0x008 1 32 --- Current Temperature
|
---|
131 | 0x05 0x010 1 32 --- Average Short Term Temperature
|
---|
132 | 0x05 0x018 1 32 --- Average Long Term Temperature
|
---|
133 | 0x05 0x020 1 50 --- Highest Temperature
|
---|
134 | 0x05 0x028 1 5 --- Lowest Temperature
|
---|
135 | 0x05 0x030 1 50 --- Highest Average Short Term Temperature
|
---|
136 | 0x05 0x038 1 16 --- Lowest Average Short Term Temperature
|
---|
137 | 0x05 0x040 1 50 --- Highest Average Long Term Temperature
|
---|
138 | 0x05 0x048 1 16 --- Lowest Average Long Term Temperature
|
---|
139 | 0x05 0x050 4 0 --- Time in Over-Temperature
|
---|
140 | 0x05 0x058 1 50 --- Specified Maximum Operating Temperature
|
---|
141 | 0x05 0x060 4 0 --- Time in Under-Temperature
|
---|
142 | 0x05 0x068 1 5 --- Specified Minimum Operating Temperature
|
---|
143 | 0x06 ===== = = === == Transport Statistics (rev 1) ==
|
---|
144 | 0x06 0x008 4 1356 --- Number of Hardware Resets
|
---|
145 | 0x06 0x018 4 54 --- Number of Interface CRC Errors
|
---|
146 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
---|
147 | 0x07 0x008 1 5 --- Percentage Used Endurance Indicator
|
---|
148 | |||_ C monitored condition met
|
---|
149 | ||__ D supports DSN
|
---|
150 | |___ N normalized value
|
---|
151 |
|
---|
152 | SATA Phy Event Counters (GP Log 0x11)
|
---|
153 | ID Size Value Description
|
---|
154 | 0x0001 2 54 Command failed due to ICRC error
|
---|
155 | 0x0003 2 52 R_ERR response for device-to-host data FIS
|
---|
156 | 0x0004 2 2 R_ERR response for host-to-device data FIS
|
---|
157 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
---|
158 | 0x0007 2 6 R_ERR response for host-to-device non-data FIS
|
---|
159 | 0x0008 2 0 Device-to-host non-data FIS retries
|
---|
160 | 0x0009 4 1359 Transition from drive PhyRdy to drive PhyNRdy
|
---|
161 | 0x000a 4 1606 Device-to-host register FISes sent due to a COMRESET
|
---|
162 | 0x000f 2 2 R_ERR response for host-to-device data FIS, CRC
|
---|
163 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
---|
164 | 0x0012 2 1 R_ERR response for host-to-device non-data FIS, CRC
|
---|
165 | 0x0013 2 5 R_ERR response for host-to-device non-data FIS, non-CRC
|
---|
166 |
|
---|