1 | # smartctl -d sat -a /dev/sda
|
---|
2 | smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.13.0-37-generic] (local build)
|
---|
3 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
4 |
|
---|
5 | === START OF INFORMATION SECTION ===
|
---|
6 | Device Model: Samsung Portable SSD T5
|
---|
7 | Serial Number: [snipped]
|
---|
8 | LU WWN Device Id: [snipped]
|
---|
9 | Firmware Version: [snipped]
|
---|
10 | User Capacity: 250.059.350.016 bytes [250 GB]
|
---|
11 | Sector Size: 512 bytes logical/physical
|
---|
12 | Rotation Rate: Solid State Device
|
---|
13 | Form Factor: mSATA
|
---|
14 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
15 | ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
|
---|
16 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
---|
17 | Local Time is: Sun Mar 18 17:22:31 2018 CET
|
---|
18 | SMART support is: Available - device has SMART capability.
|
---|
19 | SMART support is: Enabled
|
---|
20 |
|
---|
21 | === START OF READ SMART DATA SECTION ===
|
---|
22 | SMART overall-health self-assessment test result: PASSED
|
---|
23 |
|
---|
24 | General SMART Values:
|
---|
25 | Offline data collection status: (0x00) Offline data collection activity
|
---|
26 | was never started.
|
---|
27 | Auto Offline Data Collection: Disabled.
|
---|
28 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
29 | without error or no self-test has ever
|
---|
30 | been run.
|
---|
31 | Total time to complete Offline
|
---|
32 | data collection: ( 0) seconds.
|
---|
33 | Offline data collection
|
---|
34 | capabilities: (0x53) SMART execute Offline immediate.
|
---|
35 | Auto Offline data collection on/off support.
|
---|
36 | Suspend Offline collection upon new
|
---|
37 | command.
|
---|
38 | No Offline surface scan supported.
|
---|
39 | Self-test supported.
|
---|
40 | No Conveyance Self-test supported.
|
---|
41 | Selective Self-test supported.
|
---|
42 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
43 | power-saving mode.
|
---|
44 | Supports SMART auto save timer.
|
---|
45 | Error logging capability: (0x01) Error logging supported.
|
---|
46 | General Purpose Logging supported.
|
---|
47 | Short self-test routine
|
---|
48 | recommended polling time: ( 2) minutes.
|
---|
49 | Extended self-test routine
|
---|
50 | recommended polling time: ( 133) minutes.
|
---|
51 |
|
---|
52 | SMART Attributes Data Structure revision number: 1
|
---|
53 | Vendor Specific SMART Attributes with Thresholds:
|
---|
54 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
---|
55 | 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
|
---|
56 | 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 2333
|
---|
57 | 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 12
|
---|
58 | 177 Wear_Leveling_Count 0x0013 098 098 000 Pre-fail Always - 31
|
---|
59 | 179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0
|
---|
60 | 181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0
|
---|
61 | 182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0
|
---|
62 | 183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0
|
---|
63 | 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
|
---|
64 | 190 Airflow_Temperature_Cel 0x0032 066 042 000 Old_age Always - 34
|
---|
65 | 195 Hardware_ECC_Recovered 0x001a 200 200 000 Old_age Always - 0
|
---|
66 | 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
|
---|
67 | 235 Unknown_Attribute 0x0012 099 099 000 Old_age Always - 11
|
---|
68 | 241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 3779771706
|
---|
69 |
|
---|
70 | SMART Error Log Version: 1
|
---|
71 | No Errors Logged
|
---|
72 |
|
---|
73 | SMART Self-test log structure revision number 1
|
---|
74 | No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
---|
75 |
|
---|
76 | SMART Selective self-test log data structure revision number 1
|
---|
77 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
78 | 1 0 0 Not_testing
|
---|
79 | 2 0 0 Not_testing
|
---|
80 | 3 0 0 Not_testing
|
---|
81 | 4 0 0 Not_testing
|
---|
82 | 5 0 0 Not_testing
|
---|
83 | 255 0 65535 Read_scanning was never started
|
---|
84 | Selective self-test flags (0x0):
|
---|
85 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
86 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|