| 1 | smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-119-generic] (local build)
|
|---|
| 2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: ST1500LM012-1R817G
|
|---|
| 6 | Serial Number: WDZ3AGR7
|
|---|
| 7 | LU WWN Device Id: 5 000c50 0a8c679df
|
|---|
| 8 | Firmware Version: SBK2
|
|---|
| 9 | User Capacity: 1 500 301 910 016 bytes [1,50 TB]
|
|---|
| 10 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|---|
| 11 | Rotation Rate: 5400 rpm
|
|---|
| 12 | Form Factor: 2.5 inches
|
|---|
| 13 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 14 | ATA Version is: ACS-3 T13/2161-D revision 3b
|
|---|
| 15 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
|
|---|
| 16 | Local Time is: Sat Apr 21 06:33:30 2018 CEST
|
|---|
| 17 | SMART support is: Available - device has SMART capability.
|
|---|
| 18 | SMART support is: Enabled
|
|---|
| 19 |
|
|---|
| 20 | === START OF READ SMART DATA SECTION ===
|
|---|
| 21 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 22 |
|
|---|
| 23 | General SMART Values:
|
|---|
| 24 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 25 | was never started.
|
|---|
| 26 | Auto Offline Data Collection: Disabled.
|
|---|
| 27 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 28 | without error or no self-test has ever
|
|---|
| 29 | been run.
|
|---|
| 30 | Total time to complete Offline
|
|---|
| 31 | data collection: ( 0) seconds.
|
|---|
| 32 | Offline data collection
|
|---|
| 33 | capabilities: (0x71) SMART execute Offline immediate.
|
|---|
| 34 | No Auto Offline data collection support.
|
|---|
| 35 | Suspend Offline collection upon new
|
|---|
| 36 | command.
|
|---|
| 37 | No Offline surface scan supported.
|
|---|
| 38 | Self-test supported.
|
|---|
| 39 | Conveyance Self-test supported.
|
|---|
| 40 | Selective Self-test supported.
|
|---|
| 41 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 42 | power-saving mode.
|
|---|
| 43 | Supports SMART auto save timer.
|
|---|
| 44 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 45 | General Purpose Logging supported.
|
|---|
| 46 | Short self-test routine
|
|---|
| 47 | recommended polling time: ( 1) minutes.
|
|---|
| 48 | Extended self-test routine
|
|---|
| 49 | recommended polling time: ( 249) minutes.
|
|---|
| 50 | Conveyance self-test routine
|
|---|
| 51 | recommended polling time: ( 2) minutes.
|
|---|
| 52 | SCT capabilities: (0x3035) SCT Status supported.
|
|---|
| 53 | SCT Feature Control supported.
|
|---|
| 54 | SCT Data Table supported.
|
|---|
| 55 |
|
|---|
| 56 | SMART Attributes Data Structure revision number: 10
|
|---|
| 57 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 58 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|---|
| 59 | 1 Raw_Read_Error_Rate 0x000f 100 064 006 Pre-fail Always - 323904
|
|---|
| 60 | 3 Spin_Up_Time 0x0003 099 098 000 Pre-fail Always - 0
|
|---|
| 61 | 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 37
|
|---|
| 62 | 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
|
|---|
| 63 | 7 Seek_Error_Rate 0x000f 083 060 045 Pre-fail Always - 4500453109
|
|---|
| 64 | 9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 5682 (176 189 0)
|
|---|
| 65 | 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
|
|---|
| 66 | 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 21
|
|---|
| 67 | 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
|
|---|
| 68 | 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 69 | 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 70 | 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
|
|---|
| 71 | 190 Airflow_Temperature_Cel 0x0022 066 059 040 Old_age Always - 34 (Min/Max 28/36)
|
|---|
| 72 | 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 5
|
|---|
| 73 | 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 8
|
|---|
| 74 | 193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always - 325698
|
|---|
| 75 | 194 Temperature_Celsius 0x0022 034 041 000 Old_age Always - 34 (0 19 0 0 0)
|
|---|
| 76 | 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
|
|---|
| 77 | 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
|
|---|
| 78 | 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
|
|---|
| 79 | 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 5286 (213 209 0)
|
|---|
| 80 | 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2920101564
|
|---|
| 81 | 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 9916862
|
|---|
| 82 | 254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
|
|---|
| 83 |
|
|---|
| 84 | SMART Error Log Version: 1
|
|---|
| 85 | No Errors Logged
|
|---|
| 86 |
|
|---|
| 87 | SMART Self-test log structure revision number 1
|
|---|
| 88 | No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|---|
| 89 |
|
|---|
| 90 | SMART Selective self-test log data structure revision number 1
|
|---|
| 91 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 92 | 1 0 0 Not_testing
|
|---|
| 93 | 2 0 0 Not_testing
|
|---|
| 94 | 3 0 0 Not_testing
|
|---|
| 95 | 4 0 0 Not_testing
|
|---|
| 96 | 5 0 0 Not_testing
|
|---|
| 97 | Selective self-test flags (0x0):
|
|---|
| 98 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 99 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 100 |
|
|---|
