Ticket #1041: smartctl-Western_Digital-WD5000BHTZ.txt

File smartctl-Western_Digital-WD5000BHTZ.txt, 9.0 KB (added by Cmdr_Zod, 6 years ago)
Line 
1smartctl 6.5 2016-05-07 r4318 [x86_64-linux-3.10.0-862.3.2.el7.x86_64] (local build)
2Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
3
4=== START OF INFORMATION SECTION ===
5Device Model: WDC WD5000BHTZ-04JCPV1
6Firmware Version: 04.06A01
7User Capacity: 500,107,862,016 bytes [500 GB]
8Sector Sizes: 512 bytes logical, 4096 bytes physical
9Rotation Rate: 10000 rpm
10Device is: Not in smartctl database [for details use: -P showall]
11ATA Version is: ATA8-ACS (minor revision not indicated)
12SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
13Local Time is: Fri Jun 15 17:22:21 2018 CEST
14SMART support is: Available - device has SMART capability.
15SMART support is: Enabled
16AAM feature is: Unavailable
17APM level is: 128 (minimum power consumption without standby)
18Rd look-ahead is: Enabled
19Write cache is: Enabled
20ATA Security is: Disabled, frozen [SEC2]
21Wt Cache Reorder: Enabled
22
23=== START OF READ SMART DATA SECTION ===
24SMART overall-health self-assessment test result: PASSED
25
26General SMART Values:
27Offline data collection status: (0x82) Offline data collection activity
28 was completed without error.
29 Auto Offline Data Collection: Enabled.
30Self-test execution status: ( 243) Self-test routine in progress...
31 30% of test remaining.
32Total time to complete Offline
33data collection: ( 4860) seconds.
34Offline data collection
35capabilities: (0x7b) SMART execute Offline immediate.
36 Auto Offline data collection on/off support.
37 Suspend Offline collection upon new
38 command.
39 Offline surface scan supported.
40 Self-test supported.
41 Conveyance Self-test supported.
42 Selective Self-test supported.
43SMART capabilities: (0x0003) Saves SMART data before entering
44 power-saving mode.
45 Supports SMART auto save timer.
46Error logging capability: (0x01) Error logging supported.
47 General Purpose Logging supported.
48Short self-test routine
49recommended polling time: ( 2) minutes.
50Extended self-test routine
51recommended polling time: ( 58) minutes.
52Conveyance self-test routine
53recommended polling time: ( 5) minutes.
54SCT capabilities: (0x30bd) SCT Status supported.
55 SCT Error Recovery Control supported.
56 SCT Feature Control supported.
57 SCT Data Table supported.
58
59SMART Attributes Data Structure revision number: 16
60Vendor Specific SMART Attributes with Thresholds:
61ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
62 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
63 3 Spin_Up_Time POS--K 100 253 021 - 0
64 4 Start_Stop_Count -O--CK 100 100 000 - 3
65 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
66 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
67 9 Power_On_Hours -O--CK 096 096 000 - 3481
68 10 Spin_Retry_Count -O--CK 100 253 000 - 0
69 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
70 12 Power_Cycle_Count -O--CK 100 100 000 - 3
71192 Power-Off_Retract_Count -O--CK 200 200 000 - 1
72193 Load_Cycle_Count -O--CK 200 200 000 - 1
73194 Temperature_Celsius -O---K 110 107 000 - 37
74196 Reallocated_Event_Count -O--CK 200 200 000 - 0
75197 Current_Pending_Sector -O--CK 200 200 000 - 0
76198 Offline_Uncorrectable ----CK 200 200 000 - 0
77199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
78200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
79 ||||||_ K auto-keep
80 |||||__ C event count
81 ||||___ R error rate
82 |||____ S speed/performance
83 ||_____ O updated online
84 |______ P prefailure warning
85
86General Purpose Log Directory Version 1
87SMART Log Directory Version 1 [multi-sector log support]
88Address Access R/W Size Description
890x00 GPL,SL R/O 1 Log Directory
900x01 SL R/O 1 Summary SMART error log
910x02 SL R/O 5 Comprehensive SMART error log
920x03 GPL R/O 6 Ext. Comprehensive SMART error log
930x06 SL R/O 1 SMART self-test log
940x07 GPL R/O 1 Extended self-test log
950x08 GPL R/O 2 Power Conditions log
960x09 SL R/W 1 Selective self-test log
970x10 GPL R/O 1 SATA NCQ Queued Error log
980x11 GPL R/O 1 SATA Phy Event Counters log
990x80-0x9f GPL,SL R/W 16 Host vendor specific log
1000xa0-0xa7 GPL,SL VS 16 Device vendor specific log
1010xa8-0xb7 GPL,SL VS 1 Device vendor specific log
1020xbd GPL,SL VS 1 Device vendor specific log
1030xc0 GPL,SL VS 1 Device vendor specific log
1040xc1 GPL VS 93 Device vendor specific log
1050xe0 GPL,SL R/W 1 SCT Command/Status
1060xe1 GPL,SL R/W 1 SCT Data Transfer
107
108SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
109No Errors Logged
110
111SMART Extended Self-test Log Version: 1 (1 sectors)
112Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
113# 1 Short offline Completed without error 00% 3481 -
114
115SMART Selective self-test log data structure revision number 1
116 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
117 1 0 0 Not_testing
118 2 0 0 Not_testing
119 3 0 0 Not_testing
120 4 0 0 Not_testing
121 5 0 0 Not_testing
122Selective self-test flags (0x0):
123 After scanning selected spans, do NOT read-scan remainder of disk.
124If Selective self-test is pending on power-up, resume after 0 minute delay.
125
126SCT Status Version: 3
127SCT Version (vendor specific): 258 (0x0102)
128SCT Support Level: 1
129Device State: DST executing in background (3)
130Current Temperature: 37 Celsius
131Power Cycle Min/Max Temperature: 32/40 Celsius
132Lifetime Min/Max Temperature: 21/40 Celsius
133Under/Over Temperature Limit Count: 0/0
134Vendor specific:
13501 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
13600 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
137
138SCT Temperature History Version: 2
139Temperature Sampling Period: 1 minute
140Temperature Logging Interval: 1 minute
141Min/Max recommended Temperature: 0/60 Celsius
142Min/Max Temperature Limit: -41/85 Celsius
143Temperature History Size (Index): 478 (311)
144
145Index Estimated Time Temperature Celsius
146 312 2018-06-15 09:25 36 *****************
147 ... ..(147 skipped). .. *****************
148 460 2018-06-15 11:53 36 *****************
149 461 2018-06-15 11:54 37 ******************
150 462 2018-06-15 11:55 35 ****************
151 ... ..(115 skipped). .. ****************
152 100 2018-06-15 13:51 35 ****************
153 101 2018-06-15 13:52 36 *****************
154 ... ..(110 skipped). .. *****************
155 212 2018-06-15 15:43 36 *****************
156 213 2018-06-15 15:44 35 ****************
157 ... ..( 25 skipped). .. ****************
158 239 2018-06-15 16:10 35 ****************
159 240 2018-06-15 16:11 36 *****************
160 ... ..( 70 skipped). .. *****************
161 311 2018-06-15 17:22 36 *****************
162
163SCT Error Recovery Control:
164 Read: 70 (7.0 seconds)
165 Write: 70 (7.0 seconds)
166
167Device Statistics (GP/SMART Log 0x04) not supported
168
169SATA Phy Event Counters (GP Log 0x11)
170ID Size Value Description
1710x0001 2 0 Command failed due to ICRC error
1720x0002 2 0 R_ERR response for data FIS
1730x0003 2 0 R_ERR response for device-to-host data FIS
1740x0004 2 0 R_ERR response for host-to-device data FIS
1750x0005 2 0 R_ERR response for non-data FIS
1760x0006 2 0 R_ERR response for device-to-host non-data FIS
1770x0007 2 0 R_ERR response for host-to-device non-data FIS
1780x0008 2 0 Device-to-host non-data FIS retries
1790x0009 2 8 Transition from drive PhyRdy to drive PhyNRdy
1800x000a 2 9 Device-to-host register FISes sent due to a COMRESET
1810x000b 2 0 CRC errors within host-to-device FIS
1820x000f 2 0 R_ERR response for host-to-device data FIS, CRC
1830x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
1840x8000 4 12525784 Vendor specific
185