| 1 | smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.18.0-1-amd64] (local build)
|
|---|
| 2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: Samsung SSD 860 EVO 500GB
|
|---|
| 6 | Firmware Version: RVT01B6Q
|
|---|
| 7 | User Capacity: 500.107.862.016 bytes [500 GB]
|
|---|
| 8 | Sector Size: 512 bytes logical/physical
|
|---|
| 9 | Rotation Rate: Solid State Device
|
|---|
| 10 | Form Factor: 2.5 inches
|
|---|
| 11 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 12 | ATA Version is: Unknown(0x09fc), ACS-4 T13/BSR INCITS 529 revision 5
|
|---|
| 13 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
|---|
| 14 | Local Time is: Tue Sep 18 20:52:10 2018 CEST
|
|---|
| 15 | SMART support is: Available - device has SMART capability.
|
|---|
| 16 | SMART support is: Enabled
|
|---|
| 17 | AAM feature is: Unavailable
|
|---|
| 18 | APM feature is: Unavailable
|
|---|
| 19 | Rd look-ahead is: Enabled
|
|---|
| 20 | Write cache is: Enabled
|
|---|
| 21 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|---|
| 22 | Wt Cache Reorder: Enabled
|
|---|
| 23 |
|
|---|
| 24 | === START OF READ SMART DATA SECTION ===
|
|---|
| 25 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 26 |
|
|---|
| 27 | General SMART Values:
|
|---|
| 28 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 29 | was never started.
|
|---|
| 30 | Auto Offline Data Collection: Disabled.
|
|---|
| 31 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 32 | without error or no self-test has ever
|
|---|
| 33 | been run.
|
|---|
| 34 | Total time to complete Offline
|
|---|
| 35 | data collection: ( 0) seconds.
|
|---|
| 36 | Offline data collection
|
|---|
| 37 | capabilities: (0x53) SMART execute Offline immediate.
|
|---|
| 38 | Auto Offline data collection on/off support.
|
|---|
| 39 | Suspend Offline collection upon new
|
|---|
| 40 | command.
|
|---|
| 41 | No Offline surface scan supported.
|
|---|
| 42 | Self-test supported.
|
|---|
| 43 | No Conveyance Self-test supported.
|
|---|
| 44 | Selective Self-test supported.
|
|---|
| 45 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 46 | power-saving mode.
|
|---|
| 47 | Supports SMART auto save timer.
|
|---|
| 48 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 49 | General Purpose Logging supported.
|
|---|
| 50 | Short self-test routine
|
|---|
| 51 | recommended polling time: ( 2) minutes.
|
|---|
| 52 | Extended self-test routine
|
|---|
| 53 | recommended polling time: ( 85) minutes.
|
|---|
| 54 | SCT capabilities: (0x003d) SCT Status supported.
|
|---|
| 55 | SCT Error Recovery Control supported.
|
|---|
| 56 | SCT Feature Control supported.
|
|---|
| 57 | SCT Data Table supported.
|
|---|
| 58 |
|
|---|
| 59 | SMART Attributes Data Structure revision number: 1
|
|---|
| 60 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 61 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 62 | 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
|---|
| 63 | 9 Power_On_Hours -O--CK 099 099 000 - 3
|
|---|
| 64 | 12 Power_Cycle_Count -O--CK 099 099 000 - 3
|
|---|
| 65 | 177 Wear_Leveling_Count PO--C- 100 100 000 - 0
|
|---|
| 66 | 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0
|
|---|
| 67 | 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0
|
|---|
| 68 | 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0
|
|---|
| 69 | 183 Runtime_Bad_Block PO--C- 100 100 010 - 0
|
|---|
| 70 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
|---|
| 71 | 190 Airflow_Temperature_Cel -O--CK 070 063 000 - 30
|
|---|
| 72 | 195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0
|
|---|
| 73 | 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
|
|---|
| 74 | 235 Unknown_Attribute -O--C- 100 100 000 - 0
|
|---|
| 75 | 241 Total_LBAs_Written -O--CK 100 100 000 - 0
|
|---|
| 76 | ||||||_ K auto-keep
|
|---|
| 77 | |||||__ C event count
|
|---|
| 78 | ||||___ R error rate
|
|---|
| 79 | |||____ S speed/performance
|
|---|
| 80 | ||_____ O updated online
|
|---|
| 81 | |______ P prefailure warning
|
|---|
| 82 |
|
|---|
| 83 | General Purpose Log Directory Version 1
|
|---|
| 84 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 85 | Address Access R/W Size Description
|
|---|
| 86 | 0x00 GPL,SL R/O 1 Log Directory
|
|---|
| 87 | 0x01 SL R/O 1 Summary SMART error log
|
|---|
| 88 | 0x02 SL R/O 1 Comprehensive SMART error log
|
|---|
| 89 | 0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
|---|
| 90 | 0x04 GPL,SL R/O 8 Device Statistics log
|
|---|
| 91 | 0x06 SL R/O 1 SMART self-test log
|
|---|
| 92 | 0x07 GPL R/O 1 Extended self-test log
|
|---|
| 93 | 0x09 SL R/W 1 Selective self-test log
|
|---|
| 94 | 0x10 GPL R/O 1 SATA NCQ Queued Error log
|
|---|
| 95 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
|---|
| 96 | 0x13 GPL R/O 1 SATA NCQ Send and Receive log
|
|---|
| 97 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|---|
| 98 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|---|
| 99 | 0xa1 SL VS 16 Device vendor specific log
|
|---|
| 100 | 0xa5 SL VS 16 Device vendor specific log
|
|---|
| 101 | 0xce-0xcf SL VS 16 Device vendor specific log
|
|---|
| 102 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
|---|
| 103 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|---|
| 104 |
|
|---|
| 105 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
|---|
| 106 | No Errors Logged
|
|---|
| 107 |
|
|---|
| 108 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
|---|
| 109 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 110 | # 1 Short offline Completed without error 00% 3 -
|
|---|
| 111 |
|
|---|
| 112 | SMART Selective self-test log data structure revision number 1
|
|---|
| 113 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 114 | 1 0 0 Not_testing
|
|---|
| 115 | 2 0 0 Not_testing
|
|---|
| 116 | 3 0 0 Not_testing
|
|---|
| 117 | 4 0 0 Not_testing
|
|---|
| 118 | 5 0 0 Not_testing
|
|---|
| 119 | Selective self-test flags (0x0):
|
|---|
| 120 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 121 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 122 |
|
|---|
| 123 | SCT Status Version: 3
|
|---|
| 124 | SCT Version (vendor specific): 256 (0x0100)
|
|---|
| 125 | SCT Support Level: 1
|
|---|
| 126 | Device State: Active (0)
|
|---|
| 127 | Current Temperature: 30 Celsius
|
|---|
| 128 | Power Cycle Min/Max Temperature: 25/40 Celsius
|
|---|
| 129 | Lifetime Min/Max Temperature: 24/40 Celsius
|
|---|
| 130 | Under/Over Temperature Limit Count: 0/0
|
|---|
| 131 | SMART Status: 0xc24f (PASSED)
|
|---|
| 132 |
|
|---|
| 133 | SCT Temperature History Version: 2
|
|---|
| 134 | Temperature Sampling Period: 1 minute
|
|---|
| 135 | Temperature Logging Interval: 10 minutes
|
|---|
| 136 | Min/Max recommended Temperature: 0/70 Celsius
|
|---|
| 137 | Min/Max Temperature Limit: 0/70 Celsius
|
|---|
| 138 | Temperature History Size (Index): 128 (34)
|
|---|
| 139 |
|
|---|
| 140 | Index Estimated Time Temperature Celsius
|
|---|
| 141 | 35 2018-09-17 23:40 ? -
|
|---|
| 142 | ... ..( 91 skipped). .. -
|
|---|
| 143 | 127 2018-09-18 15:00 ? -
|
|---|
| 144 | 0 2018-09-18 15:10 40 *********************
|
|---|
| 145 | 1 2018-09-18 15:20 ? -
|
|---|
| 146 | ... ..( 6 skipped). .. -
|
|---|
| 147 | 8 2018-09-18 16:30 ? -
|
|---|
| 148 | 9 2018-09-18 16:40 32 *************
|
|---|
| 149 | 10 2018-09-18 16:50 ? -
|
|---|
| 150 | 11 2018-09-18 17:00 ? -
|
|---|
| 151 | 12 2018-09-18 17:10 24 *****
|
|---|
| 152 | 13 2018-09-18 17:20 25 ******
|
|---|
| 153 | 14 2018-09-18 17:30 26 *******
|
|---|
| 154 | ... ..( 4 skipped). .. *******
|
|---|
| 155 | 19 2018-09-18 18:20 26 *******
|
|---|
| 156 | 20 2018-09-18 18:30 ? -
|
|---|
| 157 | 21 2018-09-18 18:40 25 ******
|
|---|
| 158 | 22 2018-09-18 18:50 27 ********
|
|---|
| 159 | 23 2018-09-18 19:00 28 *********
|
|---|
| 160 | 24 2018-09-18 19:10 28 *********
|
|---|
| 161 | 25 2018-09-18 19:20 29 **********
|
|---|
| 162 | ... ..( 8 skipped). .. **********
|
|---|
| 163 | 34 2018-09-18 20:50 29 **********
|
|---|
| 164 |
|
|---|
| 165 | SCT Error Recovery Control:
|
|---|
| 166 | Read: Disabled
|
|---|
| 167 | Write: Disabled
|
|---|
| 168 |
|
|---|
| 169 | Device Statistics (GP Log 0x04)
|
|---|
| 170 | Page Offset Size Value Flags Description
|
|---|
| 171 | 0x01 ===== = = === == General Statistics (rev 1) ==
|
|---|
| 172 | 0x01 0x008 4 3 --- Lifetime Power-On Resets
|
|---|
| 173 | 0x01 0x010 4 3 --- Power-on Hours
|
|---|
| 174 | 0x01 0x018 6 0 --- Logical Sectors Written
|
|---|
| 175 | 0x01 0x020 6 0 --- Number of Write Commands
|
|---|
| 176 | 0x01 0x028 6 8754 --- Logical Sectors Read
|
|---|
| 177 | 0x01 0x030 6 181 --- Number of Read Commands
|
|---|
| 178 | 0x01 0x038 6 3243000 --- Date and Time TimeStamp
|
|---|
| 179 | 0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
|---|
| 180 | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
|---|
| 181 | 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
|---|
| 182 | 0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
|---|
| 183 | 0x05 0x008 1 30 --- Current Temperature
|
|---|
| 184 | 0x05 0x020 1 40 --- Highest Temperature
|
|---|
| 185 | 0x05 0x028 1 24 --- Lowest Temperature
|
|---|
| 186 | 0x05 0x058 1 55 --- Specified Maximum Operating Temperature
|
|---|
| 187 | 0x06 ===== = = === == Transport Statistics (rev 1) ==
|
|---|
| 188 | 0x06 0x008 4 14 --- Number of Hardware Resets
|
|---|
| 189 | 0x06 0x010 4 0 --- Number of ASR Events
|
|---|
| 190 | 0x06 0x018 4 0 --- Number of Interface CRC Errors
|
|---|
| 191 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
|---|
| 192 | 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
|---|
| 193 | |||_ C monitored condition met
|
|---|
| 194 | ||__ D supports DSN
|
|---|
| 195 | |___ N normalized value
|
|---|
| 196 |
|
|---|
| 197 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 198 | ID Size Value Description
|
|---|
| 199 | 0x0001 2 0 Command failed due to ICRC error
|
|---|
| 200 | 0x0002 2 0 R_ERR response for data FIS
|
|---|
| 201 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 202 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 203 | 0x0005 2 0 R_ERR response for non-data FIS
|
|---|
| 204 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 205 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 206 | 0x0008 2 0 Device-to-host non-data FIS retries
|
|---|
| 207 | 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy
|
|---|
| 208 | 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 209 | 0x000b 2 0 CRC errors within host-to-device FIS
|
|---|
| 210 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|---|
| 211 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|---|
| 212 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
|---|
| 213 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|---|
| 214 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|---|
| 215 |
|
|---|
