| 1 | smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
|
|---|
| 2 | Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: GB0160EAFJE
|
|---|
| 6 | Serial Number: 9RXGRAJX
|
|---|
| 7 | Firmware Version: HPG0
|
|---|
| 8 | User Capacity: 160,041,885,696 bytes [160 GB]
|
|---|
| 9 | Sector Size: 512 bytes logical/physical
|
|---|
| 10 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 11 | ATA Version is: ATA/ATAPI-7 T13/1532D revision 4a
|
|---|
| 12 | Local Time is: Fri Jun 8 18:08:43 2018 BST
|
|---|
| 13 | SMART support is: Available - device has SMART capability.
|
|---|
| 14 | SMART support is: Enabled
|
|---|
| 15 | AAM feature is: Unavailable
|
|---|
| 16 | APM feature is: Unavailable
|
|---|
| 17 | Rd look-ahead is: Enabled
|
|---|
| 18 | Write cache is: Enabled
|
|---|
| 19 | DSN feature is: Unavailable
|
|---|
| 20 | ATA Security is: Unavailable
|
|---|
| 21 | Another SCT command is executing, abort Feature Control
|
|---|
| 22 | (SCT ext_status_code 0xffff, action_code=4, function_code=2)
|
|---|
| 23 | Wt Cache Reorder: Unknown (SCT Feature Control command failed)
|
|---|
| 24 |
|
|---|
| 25 | === START OF READ SMART DATA SECTION ===
|
|---|
| 26 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 27 |
|
|---|
| 28 | General SMART Values:
|
|---|
| 29 | Offline data collection status: (0x82) Offline data collection activity
|
|---|
| 30 | was completed without error.
|
|---|
| 31 | Auto Offline Data Collection: Enabled.
|
|---|
| 32 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 33 | without error or no self-test has ever
|
|---|
| 34 | been run.
|
|---|
| 35 | Total time to complete Offline
|
|---|
| 36 | data collection: ( 433) seconds.
|
|---|
| 37 | Offline data collection
|
|---|
| 38 | capabilities: (0x5b) SMART execute Offline immediate.
|
|---|
| 39 | Auto Offline data collection on/off support.
|
|---|
| 40 | Suspend Offline collection upon new
|
|---|
| 41 | command.
|
|---|
| 42 | Offline surface scan supported.
|
|---|
| 43 | Self-test supported.
|
|---|
| 44 | No Conveyance Self-test supported.
|
|---|
| 45 | Selective Self-test supported.
|
|---|
| 46 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 47 | power-saving mode.
|
|---|
| 48 | Supports SMART auto save timer.
|
|---|
| 49 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 50 | General Purpose Logging supported.
|
|---|
| 51 | Short self-test routine
|
|---|
| 52 | recommended polling time: ( 2) minutes.
|
|---|
| 53 | Extended self-test routine
|
|---|
| 54 | recommended polling time: ( 54) minutes.
|
|---|
| 55 | SCT capabilities: (0x003d) SCT Status supported.
|
|---|
| 56 | SCT Error Recovery Control supported.
|
|---|
| 57 | SCT Feature Control supported.
|
|---|
| 58 | SCT Data Table supported.
|
|---|
| 59 |
|
|---|
| 60 | SMART Attributes Data Structure revision number: 10
|
|---|
| 61 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 62 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 63 | 1 Raw_Read_Error_Rate POSR-- 100 253 006 - 0
|
|---|
| 64 | 3 Spin_Up_Time PO---- 097 097 000 - 0
|
|---|
| 65 | 4 Start_Stop_Count PO--CK 100 100 020 - 41
|
|---|
| 66 | 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
|
|---|
| 67 | 7 Seek_Error_Rate POSR-- 080 060 030 - 101287792
|
|---|
| 68 | 9 Power_On_Hours -O--CK 051 051 000 - 43326
|
|---|
| 69 | 10 Spin_Retry_Count PO--C- 100 100 097 - 0
|
|---|
| 70 | 12 Power_Cycle_Count PO--CK 100 100 020 - 40
|
|---|
| 71 | 184 End-to-End_Error PO--CK 100 253 000 - 0
|
|---|
| 72 | 187 Reported_Uncorrect -O-RCK 100 100 051 - 0
|
|---|
| 73 | 189 High_Fly_Writes -O---K 100 100 000 - 0
|
|---|
| 74 | 190 Airflow_Temperature_Cel -O-RC- 063 059 000 - 37 (Min/Max 27/38)
|
|---|
| 75 | 194 Temperature_Celsius ------ 037 041 000 - 37 (0 22 0 0 0)
|
|---|
| 76 | 195 Hardware_ECC_Recovered -O--CK 078 069 000 - 59202970
|
|---|
| 77 | 197 Current_Pending_Sector ------ 100 100 000 - 0
|
|---|
| 78 | 198 Offline_Uncorrectable ------ 100 100 000 - 0
|
|---|
| 79 | 199 UDMA_CRC_Error_Count ------ 200 200 000 - 0
|
|---|
| 80 | ||||||_ K auto-keep
|
|---|
| 81 | |||||__ C event count
|
|---|
| 82 | ||||___ R error rate
|
|---|
| 83 | |||____ S speed/performance
|
|---|
| 84 | ||_____ O updated online
|
|---|
| 85 | |______ P prefailure warning
|
|---|
| 86 |
|
|---|
| 87 | General Purpose Log Directory Version 1
|
|---|
| 88 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 89 | Address Access R/W Size Description
|
|---|
| 90 | 0x00 GPL,SL R/O 1 Log Directory
|
|---|
| 91 | 0x01 GPL,SL R/O 1 Summary SMART error log
|
|---|
| 92 | 0x02 GPL,SL R/O 5 Comprehensive SMART error log
|
|---|
| 93 | 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log
|
|---|
| 94 | 0x06 GPL,SL R/O 1 SMART self-test log
|
|---|
| 95 | 0x07 GPL,SL R/O 1 Extended self-test log
|
|---|
| 96 | 0x09 GPL,SL R/W 1 Selective self-test log
|
|---|
| 97 | 0x10 GPL,SL R/O 1 NCQ Command Error log
|
|---|
| 98 | 0x11 GPL,SL R/O 1 SATA Phy Event Counters log
|
|---|
| 99 | 0x20 GPL,SL R/O 1 Streaming performance log [OBS-8]
|
|---|
| 100 | 0x21 GPL,SL R/O 1 Write stream error log
|
|---|
| 101 | 0x22 GPL,SL R/O 1 Read stream error log
|
|---|
| 102 | 0x23 GPL,SL R/O 1 Delayed sector log [OBS-8]
|
|---|
| 103 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|---|
| 104 | 0xa0 GPL,SL VS 1 Device vendor specific log
|
|---|
| 105 | 0xa1 GPL,SL VS 20 Device vendor specific log
|
|---|
| 106 | 0xa2 GPL,SL VS 101 Device vendor specific log
|
|---|
| 107 | 0xa8 GPL,SL VS 20 Device vendor specific log
|
|---|
| 108 | 0xa9 GPL,SL VS 1 Device vendor specific log
|
|---|
| 109 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
|---|
| 110 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|---|
| 111 | 0xff GPL - 23040 Reserved
|
|---|
| 112 |
|
|---|
| 113 | SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
|
|---|
| 114 | No Errors Logged
|
|---|
| 115 |
|
|---|
| 116 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
|---|
| 117 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 118 | # 1 Short offline Completed without error 00% 43326 -
|
|---|
| 119 |
|
|---|
| 120 | SMART Selective self-test log data structure revision number 1
|
|---|
| 121 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 122 | 1 0 0 Not_testing
|
|---|
| 123 | 2 0 0 Not_testing
|
|---|
| 124 | 3 0 0 Not_testing
|
|---|
| 125 | 4 0 0 Not_testing
|
|---|
| 126 | 5 0 0 Not_testing
|
|---|
| 127 | Selective self-test flags (0x0):
|
|---|
| 128 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 129 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 130 |
|
|---|
| 131 | SCT Status Version: 2
|
|---|
| 132 | SCT Version (vendor specific): 521 (0x0209)
|
|---|
| 133 | SCT Support Level: 1
|
|---|
| 134 | Device State: Active (0)
|
|---|
| 135 | Current Temperature: 37 Celsius
|
|---|
| 136 | Power Cycle Max Temperature: 38 Celsius
|
|---|
| 137 | Lifetime Max Temperature: 41 Celsius
|
|---|
| 138 |
|
|---|
| 139 | Another SCT command is executing, abort Read Data Table
|
|---|
| 140 | (SCT ext_status_code 0xffff, action_code=4, function_code=2)
|
|---|
| 141 | Read SCT Temperature History failed
|
|---|
| 142 |
|
|---|
| 143 | Another SCT command is executing, abort Error Recovery Control
|
|---|
| 144 | (SCT ext_status_code 0xffff, action_code=4, function_code=2)
|
|---|
| 145 | SCT (Get) Error Recovery Control command failed
|
|---|
| 146 |
|
|---|
| 147 | Device Statistics (GP/SMART Log 0x04) not supported
|
|---|
| 148 |
|
|---|
| 149 | Pending Defects log (GP Log 0x0c) not supported
|
|---|
| 150 |
|
|---|
| 151 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 152 | ID Size Value Description
|
|---|
| 153 | 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 154 | 0x0001 2 0 Command failed due to ICRC error
|
|---|
| 155 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 156 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 157 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 158 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 159 |
|
|---|
