| 1 | smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-6-amd64] (local build)
|
|---|
| 2 | Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: WDC WD8003FRYZ-01JPDB1
|
|---|
| 6 | Firmware Version: 01.01H02
|
|---|
| 7 | User Capacity: 8.001.563.222.016 bytes [8,00 TB]
|
|---|
| 8 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|---|
| 9 | Rotation Rate: 7200 rpm
|
|---|
| 10 | Form Factor: 3.5 inches
|
|---|
| 11 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 12 | ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
|
|---|
| 13 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
|
|---|
| 14 | Local Time is: Wed Aug 29 11:18:00 2018 CEST
|
|---|
| 15 | SMART support is: Available - device has SMART capability.
|
|---|
| 16 | SMART support is: Enabled
|
|---|
| 17 | AAM feature is: Unavailable
|
|---|
| 18 | APM level is: 254 (maximum performance)
|
|---|
| 19 | Rd look-ahead is: Enabled
|
|---|
| 20 | Write cache is: Enabled
|
|---|
| 21 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|---|
| 22 | Wt Cache Reorder: Enabled
|
|---|
| 23 |
|
|---|
| 24 | === START OF READ SMART DATA SECTION ===
|
|---|
| 25 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 26 |
|
|---|
| 27 | General SMART Values:
|
|---|
| 28 | Offline data collection status: (0x80) Offline data collection activity
|
|---|
| 29 | was never started.
|
|---|
| 30 | Auto Offline Data Collection: Enabled.
|
|---|
| 31 | Self-test execution status: ( 241) Self-test routine in progress...
|
|---|
| 32 | 10% of test remaining.
|
|---|
| 33 | Total time to complete Offline
|
|---|
| 34 | data collection: ( 93) seconds.
|
|---|
| 35 | Offline data collection
|
|---|
| 36 | capabilities: (0x5b) SMART execute Offline immediate.
|
|---|
| 37 | Auto Offline data collection on/off support.
|
|---|
| 38 | Suspend Offline collection upon new
|
|---|
| 39 | command.
|
|---|
| 40 | Offline surface scan supported.
|
|---|
| 41 | Self-test supported.
|
|---|
| 42 | No Conveyance Self-test supported.
|
|---|
| 43 | Selective Self-test supported.
|
|---|
| 44 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 45 | power-saving mode.
|
|---|
| 46 | Supports SMART auto save timer.
|
|---|
| 47 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 48 | General Purpose Logging supported.
|
|---|
| 49 | Short self-test routine
|
|---|
| 50 | recommended polling time: ( 2) minutes.
|
|---|
| 51 | Extended self-test routine
|
|---|
| 52 | recommended polling time: (1193) minutes.
|
|---|
| 53 | SCT capabilities: (0x003d) SCT Status supported.
|
|---|
| 54 | SCT Error Recovery Control supported.
|
|---|
| 55 | SCT Feature Control supported.
|
|---|
| 56 | SCT Data Table supported.
|
|---|
| 57 |
|
|---|
| 58 | SMART Attributes Data Structure revision number: 16
|
|---|
| 59 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 60 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 61 | 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
|
|---|
| 62 | 2 Throughput_Performance P-S--- 131 131 054 - 104
|
|---|
| 63 | 3 Spin_Up_Time POS--- 150 150 024 - 433 (Average 444)
|
|---|
| 64 | 4 Start_Stop_Count -O--C- 100 100 000 - 12
|
|---|
| 65 | 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
|
|---|
| 66 | 7 Seek_Error_Rate PO-R-- 100 100 067 - 0
|
|---|
| 67 | 8 Seek_Time_Performance P-S--- 128 128 020 - 18
|
|---|
| 68 | 9 Power_On_Hours -O--C- 100 100 000 - 286
|
|---|
| 69 | 10 Spin_Retry_Count PO--C- 100 100 060 - 0
|
|---|
| 70 | 12 Power_Cycle_Count -O--CK 100 100 000 - 12
|
|---|
| 71 | 22 Unknown_Attribute PO---K 100 100 025 - 100
|
|---|
| 72 | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 24
|
|---|
| 73 | 193 Load_Cycle_Count -O--C- 100 100 000 - 24
|
|---|
| 74 | 194 Temperature_Celsius -O---- 181 181 000 - 33 (Min/Max 24/36)
|
|---|
| 75 | 196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
|---|
| 76 | 197 Current_Pending_Sector -O---K 100 100 000 - 0
|
|---|
| 77 | 198 Offline_Uncorrectable ---R-- 100 100 000 - 0
|
|---|
| 78 | 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
|
|---|
| 79 | ||||||_ K auto-keep
|
|---|
| 80 | |||||__ C event count
|
|---|
| 81 | ||||___ R error rate
|
|---|
| 82 | |||____ S speed/performance
|
|---|
| 83 | ||_____ O updated online
|
|---|
| 84 | |______ P prefailure warning
|
|---|
| 85 |
|
|---|
| 86 | General Purpose Log Directory Version 1
|
|---|
| 87 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 88 | Address Access R/W Size Description
|
|---|
| 89 | 0x00 GPL,SL R/O 1 Log Directory
|
|---|
| 90 | 0x01 SL R/O 1 Summary SMART error log
|
|---|
| 91 | 0x02 SL R/O 1 Comprehensive SMART error log
|
|---|
| 92 | 0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
|---|
| 93 | 0x04 GPL R/O 256 Device Statistics log
|
|---|
| 94 | 0x04 SL R/O 255 Device Statistics log
|
|---|
| 95 | 0x06 SL R/O 1 SMART self-test log
|
|---|
| 96 | 0x07 GPL R/O 1 Extended self-test log
|
|---|
| 97 | 0x08 GPL R/O 2 Power Conditions log
|
|---|
| 98 | 0x09 SL R/W 1 Selective self-test log
|
|---|
| 99 | 0x0c GPL R/O 5501 Pending Defects log
|
|---|
| 100 | 0x10 GPL R/O 1 SATA NCQ Queued Error log
|
|---|
| 101 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
|---|
| 102 | 0x12 GPL R/O 1 SATA NCQ NON-DATA log
|
|---|
| 103 | 0x13 GPL R/O 1 SATA NCQ Send and Receive log
|
|---|
| 104 | 0x15 GPL R/W 1 SATA Rebuild Assist log
|
|---|
| 105 | 0x21 GPL R/O 1 Write stream error log
|
|---|
| 106 | 0x22 GPL R/O 1 Read stream error log
|
|---|
| 107 | 0x24 GPL R/O 256 Current Device Internal Status Data log
|
|---|
| 108 | 0x25 GPL R/O 256 Saved Device Internal Status Data log
|
|---|
| 109 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|---|
| 110 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|---|
| 111 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
|---|
| 112 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|---|
| 113 |
|
|---|
| 114 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
|---|
| 115 | No Errors Logged
|
|---|
| 116 |
|
|---|
| 117 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
|---|
| 118 | No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|---|
| 119 |
|
|---|
| 120 | SMART Selective self-test log data structure revision number 1
|
|---|
| 121 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 122 | 1 0 0 Not_testing
|
|---|
| 123 | 2 0 0 Not_testing
|
|---|
| 124 | 3 0 0 Not_testing
|
|---|
| 125 | 4 0 0 Not_testing
|
|---|
| 126 | 5 0 0 Not_testing
|
|---|
| 127 | Selective self-test flags (0x0):
|
|---|
| 128 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 129 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 130 |
|
|---|
| 131 | SCT Status Version: 3
|
|---|
| 132 | SCT Version (vendor specific): 256 (0x0100)
|
|---|
| 133 | SCT Support Level: 0
|
|---|
| 134 | Device State: DST executing in background (3)
|
|---|
| 135 | Current Temperature: 33 Celsius
|
|---|
| 136 | Power Cycle Min/Max Temperature: 31/33 Celsius
|
|---|
| 137 | Lifetime Min/Max Temperature: 24/36 Celsius
|
|---|
| 138 | Under/Over Temperature Limit Count: 0/0
|
|---|
| 139 |
|
|---|
| 140 | SCT Temperature History Version: 2
|
|---|
| 141 | Temperature Sampling Period: 1 minute
|
|---|
| 142 | Temperature Logging Interval: 1 minute
|
|---|
| 143 | Min/Max recommended Temperature: 0/60 Celsius
|
|---|
| 144 | Min/Max Temperature Limit: -40/70 Celsius
|
|---|
| 145 | Temperature History Size (Index): 128 (78)
|
|---|
| 146 |
|
|---|
| 147 | Index Estimated Time Temperature Celsius
|
|---|
| 148 | 79 2018-08-29 09:11 32 *************
|
|---|
| 149 | ... ..( 85 skipped). .. *************
|
|---|
| 150 | 37 2018-08-29 10:37 32 *************
|
|---|
| 151 | 38 2018-08-29 10:38 30 ***********
|
|---|
| 152 | 39 2018-08-29 10:39 31 ************
|
|---|
| 153 | ... ..( 3 skipped). .. ************
|
|---|
| 154 | 43 2018-08-29 10:43 31 ************
|
|---|
| 155 | 44 2018-08-29 10:44 32 *************
|
|---|
| 156 | ... ..( 3 skipped). .. *************
|
|---|
| 157 | 48 2018-08-29 10:48 32 *************
|
|---|
| 158 | 49 2018-08-29 10:49 33 **************
|
|---|
| 159 | ... ..( 27 skipped). .. **************
|
|---|
| 160 | 77 2018-08-29 11:17 33 **************
|
|---|
| 161 | 78 2018-08-29 11:18 32 *************
|
|---|
| 162 |
|
|---|
| 163 | SCT Error Recovery Control:
|
|---|
| 164 | Read: Disabled
|
|---|
| 165 | Write: Disabled
|
|---|
| 166 |
|
|---|
| 167 | Device Statistics (GP/SMART Log 0x04) not supported
|
|---|
| 168 |
|
|---|
| 169 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 170 | ID Size Value Description
|
|---|
| 171 | 0x0001 2 0 Command failed due to ICRC error
|
|---|
| 172 | 0x0002 2 0 R_ERR response for data FIS
|
|---|
| 173 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 174 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 175 | 0x0005 2 0 R_ERR response for non-data FIS
|
|---|
| 176 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 177 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 178 | 0x0008 2 0 Device-to-host non-data FIS retries
|
|---|
| 179 | 0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy
|
|---|
| 180 | 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 181 | 0x000b 2 0 CRC errors within host-to-device FIS
|
|---|
| 182 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|---|
| 183 |
|
|---|
