1 | smartctl 6.6 2017-11-05 r4594 [x86_64-w64-mingw32-w10-b17134] (sf-6.6-1) |
---|
2 | Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org |
---|
3 | |
---|
4 | === START OF INFORMATION SECTION === |
---|
5 | Device Model: LITEON CV1-8B256 |
---|
6 | Serial Number: KN2560L012649007D9HC |
---|
7 | LU WWN Device Id: 0 000000 000000000 |
---|
8 | Firmware Version: G881201 |
---|
9 | User Capacity: 256,060,514,304 bytes [256 GB] |
---|
10 | Sector Size: 512 bytes logical/physical |
---|
11 | Rotation Rate: Solid State Device |
---|
12 | Device is: Not in smartctl database [for details use: -P showall] |
---|
13 | ATA Version is: ACS-2 (minor revision not indicated) |
---|
14 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) |
---|
15 | Local Time is: Mon May 14 21:25:43 2018 RDT |
---|
16 | SMART support is: Available - device has SMART capability. |
---|
17 | SMART support is: Enabled |
---|
18 | AAM feature is: Unavailable |
---|
19 | APM feature is: Unavailable |
---|
20 | Rd look-ahead is: Enabled |
---|
21 | Write cache is: Enabled |
---|
22 | DSN feature is: Unavailable |
---|
23 | ATA Security is: Disabled, NOT FROZEN [SEC1] |
---|
24 | Write SCT (Get) Feature Control Command failed: Input/output error |
---|
25 | Wt Cache Reorder: Unknown (SCT Feature Control command failed) |
---|
26 | |
---|
27 | === START OF READ SMART DATA SECTION === |
---|
28 | SMART overall-health self-assessment test result: PASSED |
---|
29 | |
---|
30 | General SMART Values: |
---|
31 | Offline data collection status: (0x02) Offline data collection activity |
---|
32 | was completed without error. |
---|
33 | Auto Offline Data Collection: Disabled. |
---|
34 | Self-test execution status: ( 0) The previous self-test routine completed |
---|
35 | without error or no self-test has ever |
---|
36 | been run. |
---|
37 | Total time to complete Offline |
---|
38 | data collection: ( 0) seconds. |
---|
39 | Offline data collection |
---|
40 | capabilities: (0x11) SMART execute Offline immediate. |
---|
41 | No Auto Offline data collection support. |
---|
42 | Suspend Offline collection upon new |
---|
43 | command. |
---|
44 | No Offline surface scan supported. |
---|
45 | Self-test supported. |
---|
46 | No Conveyance Self-test supported. |
---|
47 | No Selective Self-test supported. |
---|
48 | SMART capabilities: (0x0003) Saves SMART data before entering |
---|
49 | power-saving mode. |
---|
50 | Supports SMART auto save timer. |
---|
51 | Error logging capability: (0x01) Error logging supported. |
---|
52 | General Purpose Logging supported. |
---|
53 | Short self-test routine |
---|
54 | recommended polling time: ( 1) minutes. |
---|
55 | Extended self-test routine |
---|
56 | recommended polling time: ( 10) minutes. |
---|
57 | SCT capabilities: (0x003d) SCT Status supported. |
---|
58 | SCT Error Recovery Control supported. |
---|
59 | SCT Feature Control supported. |
---|
60 | SCT Data Table supported. |
---|
61 | |
---|
62 | SMART Attributes Data Structure revision number: 1 |
---|
63 | Vendor Specific SMART Attributes with Thresholds: |
---|
64 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
---|
65 | 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 |
---|
66 | 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 |
---|
67 | 9 Power_On_Hours -O---- 100 100 000 - 295 |
---|
68 | 12 Power_Cycle_Count PO---- 100 100 000 - 1702 |
---|
69 | 177 Wear_Leveling_Count ------ 100 100 000 - 126289 |
---|
70 | 178 Used_Rsvd_Blk_Cnt_Chip PO---- 100 100 000 - 0 |
---|
71 | 181 Program_Fail_Cnt_Total PO---- 100 100 000 - 0 |
---|
72 | 182 Erase_Fail_Count_Total PO---- 100 100 000 - 0 |
---|
73 | 187 Reported_Uncorrect PO---- 100 100 000 - 0 |
---|
74 | 188 Command_Timeout PO---- 100 100 000 - 60 |
---|
75 | 189 Unknown_SSD_Attribute ------ 100 100 000 - 120 |
---|
76 | 191 Unknown_SSD_Attribute ------ 100 100 000 - 10 |
---|
77 | 192 Power-Off_Retract_Count PO---- 100 100 000 - 51 |
---|
78 | 196 Reallocated_Event_Count PO---- 100 100 000 - 0 |
---|
79 | 198 Offline_Uncorrectable PO---- 100 100 000 - 0 |
---|
80 | 199 UDMA_CRC_Error_Count PO---- 100 100 000 - 0 |
---|
81 | 232 Available_Reservd_Space PO---- 100 100 010 - 100 |
---|
82 | 241 Total_LBAs_Written PO---- 100 100 000 - 323639 |
---|
83 | 242 Total_LBAs_Read PO---- 100 100 000 - 371122 |
---|
84 | ||||||_ K auto-keep |
---|
85 | |||||__ C event count |
---|
86 | ||||___ R error rate |
---|
87 | |||____ S speed/performance |
---|
88 | ||_____ O updated online |
---|
89 | |______ P prefailure warning |
---|
90 | |
---|
91 | General Purpose Log Directory Version 1 |
---|
92 | SMART Log Directory Version 1 [multi-sector log support] |
---|
93 | Address Access R/W Size Description |
---|
94 | 0x00 GPL,SL R/O 1 Log Directory |
---|
95 | 0x01 GPL,SL R/O 1 Summary SMART error log |
---|
96 | 0x02 GPL,SL R/O 1 Comprehensive SMART error log |
---|
97 | 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log |
---|
98 | 0x04 GPL,SL R/O 8 Device Statistics log |
---|
99 | 0x06 GPL,SL R/O 1 SMART self-test log |
---|
100 | 0x07 GPL,SL R/O 1 Extended self-test log |
---|
101 | 0x09 GPL,SL R/W 1 Selective self-test log |
---|
102 | 0x10 GPL,SL R/O 1 NCQ Command Error log |
---|
103 | 0x11 GPL,SL R/O 1 SATA Phy Event Counters log |
---|
104 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log |
---|
105 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
---|
106 | 0xe0 GPL,SL R/W 1 SCT Command/Status |
---|
107 | 0xe1 GPL,SL R/W 1 SCT Data Transfer |
---|
108 | |
---|
109 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors) |
---|
110 | No Errors Logged |
---|
111 | |
---|
112 | SMART Extended Self-test Log Version: 1 (1 sectors) |
---|
113 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
---|
114 | # 1 Short offline Completed without error 00% 295 - |
---|
115 | # 2 Short offline Completed without error 00% 264 - |
---|
116 | # 3 Short offline Completed without error 00% 175 - |
---|
117 | # 4 Short offline Completed without error 00% 4 - |
---|
118 | |
---|
119 | Selective Self-tests/Logging not supported |
---|
120 | |
---|
121 | SCT Status Version: 3 |
---|
122 | SCT Version (vendor specific): 0 (0x0000) |
---|
123 | SCT Support Level: 0 |
---|
124 | Device State: Active (0) |
---|
125 | Current Temperature: 0 Celsius |
---|
126 | Power Cycle Max Temperature: 0 Celsius |
---|
127 | Lifetime Max Temperature: 0 Celsius |
---|
128 | |
---|
129 | SCT Temperature History Version: 2 |
---|
130 | Temperature Sampling Period: 0 minutes |
---|
131 | Temperature Logging Interval: 0 minutes |
---|
132 | Min/Max recommended Temperature: 0/100 Celsius |
---|
133 | Min/Max Temperature Limit: 0/100 Celsius |
---|
134 | Temperature History Size (Index): 128 (127) |
---|
135 | |
---|
136 | Index Estimated Time Temperature Celsius |
---|
137 | 0 2018-05-14 19:18 ? - |
---|
138 | ... ..(126 skipped). .. - |
---|
139 | 127 2018-05-14 21:25 ? - |
---|
140 | |
---|
141 | SCT Error Recovery Control: |
---|
142 | Read: Disabled |
---|
143 | Write: Disabled |
---|
144 | |
---|
145 | Device Statistics (GP Log 0x04) |
---|
146 | Page Offset Size Value Flags Description |
---|
147 | 0x01 ===== = = === == General Statistics (rev 2) == |
---|
148 | 0x01 0x008 4 1702 --- Lifetime Power-On Resets |
---|
149 | 0x01 0x010 4 295 --- Power-on Hours |
---|
150 | 0x01 0x018 6 4030187599 --- Logical Sectors Written |
---|
151 | 0x01 0x020 6 365212387 --- Number of Write Commands |
---|
152 | 0x01 0x028 6 2847064097 --- Logical Sectors Read |
---|
153 | 0x01 0x030 6 502278128 --- Number of Read Commands |
---|
154 | 0x02 ===== = = === == Free-Fall Statistics (empty) == |
---|
155 | 0x03 ===== = = === == Rotating Media Statistics (empty) == |
---|
156 | 0x04 ===== = = === == General Errors Statistics (rev 1) == |
---|
157 | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors |
---|
158 | 0x04 0x010 4 53 --- Resets Between Cmd Acceptance and Completion |
---|
159 | 0x05 ===== = = === == Temperature Statistics (rev 1) == |
---|
160 | 0x05 0x008 1 55 --- Current Temperature |
---|
161 | 0x06 ===== = = === == Transport Statistics (rev 1) == |
---|
162 | 0x06 0x008 4 3767 --- Number of Hardware Resets |
---|
163 | 0x06 0x018 4 1 --- Number of Interface CRC Errors |
---|
164 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) == |
---|
165 | 0x07 0x008 1 2 --- Percentage Used Endurance Indicator |
---|
166 | |||_ C monitored condition met |
---|
167 | ||__ D supports DSN |
---|
168 | |___ N normalized value |
---|
169 | |
---|
170 | Pending Defects log (GP Log 0x0c) not supported |
---|
171 | |
---|
172 | SATA Phy Event Counters (GP Log 0x11) |
---|
173 | ID Size Value Description |
---|
174 | 0x0001 2 0 Command failed due to ICRC error |
---|
175 | 0x0002 2 0 R_ERR response for data FIS |
---|
176 | 0x0003 2 0 R_ERR response for device-to-host data FIS |
---|
177 | 0x0004 2 0 R_ERR response for host-to-device data FIS |
---|
178 | 0x0005 2 0 R_ERR response for non-data FIS |
---|
179 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS |
---|
180 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
---|
181 | 0x0008 2 0 Device-to-host non-data FIS retries |
---|
182 | 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy |
---|
183 | 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET |
---|
184 | 0x000b 2 0 CRC errors within host-to-device FIS |
---|
185 | 0x000d 2 0 Non-CRC errors within host-to-device FIS |
---|
186 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC |
---|
187 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC |
---|
188 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC |
---|
189 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC |
---|
190 | |
---|