| 1 | smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-RELEASE amd64] (local build)
|
|---|
| 2 | Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: WDC WD100EFAX-68LHPN0
|
|---|
| 6 | Firmware Version: 83.H0A83
|
|---|
| 7 | User Capacity: 10,000,831,348,736 bytes [10.0 TB]
|
|---|
| 8 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|---|
| 9 | Rotation Rate: 5400 rpm
|
|---|
| 10 | Form Factor: 3.5 inches
|
|---|
| 11 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 12 | ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
|
|---|
| 13 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
|---|
| 14 | Local Time is: Fri May 4 12:03:29 2018 AEST
|
|---|
| 15 | SMART support is: Available - device has SMART capability.
|
|---|
| 16 | SMART support is: Enabled
|
|---|
| 17 | AAM feature is: Unavailable
|
|---|
| 18 | APM level is: 164 (intermediate level without standby)
|
|---|
| 19 | Rd look-ahead is: Enabled
|
|---|
| 20 | Write cache is: Enabled
|
|---|
| 21 | DSN feature is: Unavailable
|
|---|
| 22 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|---|
| 23 | Wt Cache Reorder: Enabled
|
|---|
| 24 |
|
|---|
| 25 | === START OF READ SMART DATA SECTION ===
|
|---|
| 26 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 27 |
|
|---|
| 28 | General SMART Values:
|
|---|
| 29 | Offline data collection status: (0x82) Offline data collection activity
|
|---|
| 30 | was completed without error.
|
|---|
| 31 | Auto Offline Data Collection: Enabled.
|
|---|
| 32 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 33 | without error or no self-test has ever
|
|---|
| 34 | been run.
|
|---|
| 35 | Total time to complete Offline
|
|---|
| 36 | data collection: ( 93) seconds.
|
|---|
| 37 | Offline data collection
|
|---|
| 38 | capabilities: (0x5b) SMART execute Offline immediate.
|
|---|
| 39 | Auto Offline data collection on/off support.
|
|---|
| 40 | Suspend Offline collection upon new
|
|---|
| 41 | command.
|
|---|
| 42 | Offline surface scan supported.
|
|---|
| 43 | Self-test supported.
|
|---|
| 44 | No Conveyance Self-test supported.
|
|---|
| 45 | Selective Self-test supported.
|
|---|
| 46 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 47 | power-saving mode.
|
|---|
| 48 | Supports SMART auto save timer.
|
|---|
| 49 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 50 | General Purpose Logging supported.
|
|---|
| 51 | Short self-test routine
|
|---|
| 52 | recommended polling time: ( 2) minutes.
|
|---|
| 53 | Extended self-test routine
|
|---|
| 54 | recommended polling time: (1220) minutes.
|
|---|
| 55 | SCT capabilities: (0x003d) SCT Status supported.
|
|---|
| 56 | SCT Error Recovery Control supported.
|
|---|
| 57 | SCT Feature Control supported.
|
|---|
| 58 | SCT Data Table supported.
|
|---|
| 59 |
|
|---|
| 60 | SMART Attributes Data Structure revision number: 16
|
|---|
| 61 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 62 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 63 | 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
|
|---|
| 64 | 2 Throughput_Performance --S--- 128 128 054 - 116
|
|---|
| 65 | 3 Spin_Up_Time POS--- 100 100 024 - 0
|
|---|
| 66 | 4 Start_Stop_Count -O--C- 100 100 000 - 5
|
|---|
| 67 | 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
|
|---|
| 68 | 7 Seek_Error_Rate -O-R-- 100 100 067 - 0
|
|---|
| 69 | 8 Seek_Time_Performance --S--- 128 128 020 - 18
|
|---|
| 70 | 9 Power_On_Hours -O--C- 100 100 000 - 442
|
|---|
| 71 | 10 Spin_Retry_Count -O--C- 100 100 060 - 0
|
|---|
| 72 | 12 Power_Cycle_Count -O--CK 100 100 000 - 5
|
|---|
| 73 | 22 Unknown_Attribute PO---K 100 100 025 - 100
|
|---|
| 74 | 192 Power-Off_Retract_Count -O--CK 100 100 000 - 143
|
|---|
| 75 | 193 Load_Cycle_Count -O--C- 100 100 000 - 143
|
|---|
| 76 | 194 Temperature_Celsius -O---- 171 171 000 - 38 (Min/Max 21/44)
|
|---|
| 77 | 196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
|---|
| 78 | 197 Current_Pending_Sector -O---K 100 100 000 - 0
|
|---|
| 79 | 198 Offline_Uncorrectable ---R-- 100 100 000 - 0
|
|---|
| 80 | 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
|
|---|
| 81 | ||||||_ K auto-keep
|
|---|
| 82 | |||||__ C event count
|
|---|
| 83 | ||||___ R error rate
|
|---|
| 84 | |||____ S speed/performance
|
|---|
| 85 | ||_____ O updated online
|
|---|
| 86 | |______ P prefailure warning
|
|---|
| 87 |
|
|---|
| 88 | General Purpose Log Directory Version 1
|
|---|
| 89 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 90 | Address Access R/W Size Description
|
|---|
| 91 | 0x00 GPL,SL R/O 1 Log Directory
|
|---|
| 92 | 0x01 SL R/O 1 Summary SMART error log
|
|---|
| 93 | 0x02 SL R/O 1 Comprehensive SMART error log
|
|---|
| 94 | 0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
|---|
| 95 | 0x04 GPL R/O 256 Device Statistics log
|
|---|
| 96 | 0x04 SL R/O 255 Device Statistics log
|
|---|
| 97 | 0x06 SL R/O 1 SMART self-test log
|
|---|
| 98 | 0x07 GPL R/O 1 Extended self-test log
|
|---|
| 99 | 0x08 GPL R/O 2 Power Conditions log
|
|---|
| 100 | 0x09 SL R/W 1 Selective self-test log
|
|---|
| 101 | 0x0c GPL R/O 5501 Pending Defects log
|
|---|
| 102 | 0x10 GPL R/O 1 NCQ Command Error log
|
|---|
| 103 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
|---|
| 104 | 0x12 GPL R/O 1 SATA NCQ Non-Data log
|
|---|
| 105 | 0x13 GPL R/O 1 SATA NCQ Send and Receive log
|
|---|
| 106 | 0x15 GPL R/W 1 Rebuild Assist log
|
|---|
| 107 | 0x21 GPL R/O 1 Write stream error log
|
|---|
| 108 | 0x22 GPL R/O 1 Read stream error log
|
|---|
| 109 | 0x24 GPL R/O 256 Current Device Internal Status Data log
|
|---|
| 110 | 0x25 GPL R/O 256 Saved Device Internal Status Data log
|
|---|
| 111 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|---|
| 112 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|---|
| 113 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
|---|
| 114 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
|---|
| 115 |
|
|---|
| 116 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
|---|
| 117 | No Errors Logged
|
|---|
| 118 |
|
|---|
| 119 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
|---|
| 120 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 121 | # 1 Short offline Completed without error 00% 441 -
|
|---|
| 122 |
|
|---|
| 123 | SMART Selective self-test log data structure revision number 1
|
|---|
| 124 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 125 | 1 0 0 Not_testing
|
|---|
| 126 | 2 0 0 Not_testing
|
|---|
| 127 | 3 0 0 Not_testing
|
|---|
| 128 | 4 0 0 Not_testing
|
|---|
| 129 | 5 0 0 Not_testing
|
|---|
| 130 | Selective self-test flags (0x0):
|
|---|
| 131 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 132 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 133 |
|
|---|
| 134 | SCT Status Version: 3
|
|---|
| 135 | SCT Version (vendor specific): 256 (0x0100)
|
|---|
| 136 | SCT Support Level: 0
|
|---|
| 137 | Device State: Active (0)
|
|---|
| 138 | Current Temperature: 38 Celsius
|
|---|
| 139 | Power Cycle Min/Max Temperature: 21/42 Celsius
|
|---|
| 140 | Lifetime Min/Max Temperature: 21/44 Celsius
|
|---|
| 141 | Under/Over Temperature Limit Count: 0/0
|
|---|
| 142 |
|
|---|
| 143 | SCT Temperature History Version: 2
|
|---|
| 144 | Temperature Sampling Period: 1 minute
|
|---|
| 145 | Temperature Logging Interval: 1 minute
|
|---|
| 146 | Min/Max recommended Temperature: 0/65 Celsius
|
|---|
| 147 | Min/Max Temperature Limit: -40/70 Celsius
|
|---|
| 148 | Temperature History Size (Index): 128 (60)
|
|---|
| 149 |
|
|---|
| 150 | Index Estimated Time Temperature Celsius
|
|---|
| 151 | 61 2018-05-04 09:56 34 ***************
|
|---|
| 152 | ... ..( 6 skipped). .. ***************
|
|---|
| 153 | 68 2018-05-04 10:03 34 ***************
|
|---|
| 154 | 69 2018-05-04 10:04 35 ****************
|
|---|
| 155 | ... ..( 9 skipped). .. ****************
|
|---|
| 156 | 79 2018-05-04 10:14 35 ****************
|
|---|
| 157 | 80 2018-05-04 10:15 36 *****************
|
|---|
| 158 | ... ..( 29 skipped). .. *****************
|
|---|
| 159 | 110 2018-05-04 10:45 36 *****************
|
|---|
| 160 | 111 2018-05-04 10:46 37 ******************
|
|---|
| 161 | ... ..( 8 skipped). .. ******************
|
|---|
| 162 | 120 2018-05-04 10:55 37 ******************
|
|---|
| 163 | 121 2018-05-04 10:56 38 *******************
|
|---|
| 164 | ... ..( 8 skipped). .. *******************
|
|---|
| 165 | 2 2018-05-04 11:05 38 *******************
|
|---|
| 166 | 3 2018-05-04 11:06 37 ******************
|
|---|
| 167 | ... ..( 33 skipped). .. ******************
|
|---|
| 168 | 37 2018-05-04 11:40 37 ******************
|
|---|
| 169 | 38 2018-05-04 11:41 38 *******************
|
|---|
| 170 | ... ..( 7 skipped). .. *******************
|
|---|
| 171 | 46 2018-05-04 11:49 38 *******************
|
|---|
| 172 | 47 2018-05-04 11:50 39 ********************
|
|---|
| 173 | 48 2018-05-04 11:51 39 ********************
|
|---|
| 174 | 49 2018-05-04 11:52 39 ********************
|
|---|
| 175 | 50 2018-05-04 11:53 38 *******************
|
|---|
| 176 | ... ..( 8 skipped). .. *******************
|
|---|
| 177 | 59 2018-05-04 12:02 38 *******************
|
|---|
| 178 | 60 2018-05-04 12:03 34 ***************
|
|---|
| 179 |
|
|---|
| 180 | SCT Error Recovery Control:
|
|---|
| 181 | Read: 70 (7.0 seconds)
|
|---|
| 182 | Write: 70 (7.0 seconds)
|
|---|
| 183 |
|
|---|
| 184 | Device Statistics (GP/SMART Log 0x04) not supported
|
|---|
| 185 |
|
|---|
| 186 | Pending Defects log (GP Log 0x0c) supported [please try: '-l defects']
|
|---|
| 187 |
|
|---|
| 188 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 189 | ID Size Value Description
|
|---|
| 190 | 0x0001 2 0 Command failed due to ICRC error
|
|---|
| 191 | 0x0002 2 0 R_ERR response for data FIS
|
|---|
| 192 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 193 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 194 | 0x0005 2 0 R_ERR response for non-data FIS
|
|---|
| 195 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 196 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 197 | 0x0008 2 0 Device-to-host non-data FIS retries
|
|---|
| 198 | 0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy
|
|---|
| 199 | 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 200 | 0x000b 2 0 CRC errors within host-to-device FIS
|
|---|
| 201 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|---|
| 202 |
|
|---|
