1 | smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.15.12-201.fc26.x86_64] (local build)
|
---|
2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Device Model: NT-256
|
---|
6 | Firmware Version: 1.00
|
---|
7 | User Capacity: 256,060,514,304 bytes [256 GB]
|
---|
8 | Sector Size: 512 bytes logical/physical
|
---|
9 | Rotation Rate: Solid State Device
|
---|
10 | Form Factor: 2.5 inches
|
---|
11 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
12 | ATA Version is: Unknown(0x0ff8) (minor revision not indicated)
|
---|
13 | SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
|
---|
14 | Local Time is: Tue Apr 17 21:55:31 2018 BST
|
---|
15 | SMART support is: Available - device has SMART capability.
|
---|
16 | SMART support is: Enabled
|
---|
17 | AAM feature is: Unavailable
|
---|
18 | APM feature is: Unavailable
|
---|
19 | Rd look-ahead is: Enabled
|
---|
20 | Write cache is: Enabled
|
---|
21 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
---|
22 | Wt Cache Reorder: Unavailable
|
---|
23 |
|
---|
24 | === START OF READ SMART DATA SECTION ===
|
---|
25 | SMART Status not supported: Incomplete response, ATA output registers missing
|
---|
26 | SMART overall-health self-assessment test result: PASSED
|
---|
27 | Warning: This result is based on an Attribute check.
|
---|
28 |
|
---|
29 | General SMART Values:
|
---|
30 | Offline data collection status: (0x00) Offline data collection activity
|
---|
31 | was never started.
|
---|
32 | Auto Offline Data Collection: Disabled.
|
---|
33 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
34 | without error or no self-test has ever
|
---|
35 | been run.
|
---|
36 | Total time to complete Offline
|
---|
37 | data collection: (65535) seconds.
|
---|
38 | Offline data collection
|
---|
39 | capabilities: (0x79) SMART execute Offline immediate.
|
---|
40 | No Auto Offline data collection support.
|
---|
41 | Suspend Offline collection upon new
|
---|
42 | command.
|
---|
43 | Offline surface scan supported.
|
---|
44 | Self-test supported.
|
---|
45 | Conveyance Self-test supported.
|
---|
46 | Selective Self-test supported.
|
---|
47 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
48 | power-saving mode.
|
---|
49 | Supports SMART auto save timer.
|
---|
50 | Error logging capability: (0x01) Error logging supported.
|
---|
51 | General Purpose Logging supported.
|
---|
52 | Short self-test routine
|
---|
53 | recommended polling time: ( 2) minutes.
|
---|
54 | Extended self-test routine
|
---|
55 | recommended polling time: ( 30) minutes.
|
---|
56 | Conveyance self-test routine
|
---|
57 | recommended polling time: ( 6) minutes.
|
---|
58 |
|
---|
59 | SMART Attributes Data Structure revision number: 16
|
---|
60 | Vendor Specific SMART Attributes with Thresholds:
|
---|
61 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
62 | 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
|
---|
63 | 5 Reallocated_Sector_Ct ------ 100 100 000 - 0
|
---|
64 | 9 Power_On_Hours -O--CK 100 100 000 - 0
|
---|
65 | 12 Power_Cycle_Count ------ 100 100 000 - 2
|
---|
66 | 160 Unknown_Attribute ------ 100 100 000 - 0
|
---|
67 | 161 Unknown_Attribute ------ 100 100 000 - 0
|
---|
68 | 163 Unknown_Attribute ------ 100 100 000 - 0
|
---|
69 | 164 Unknown_Attribute ------ 100 100 000 - 2
|
---|
70 | 165 Unknown_Attribute ------ 100 100 000 - 1
|
---|
71 | 166 Unknown_Attribute ------ 100 100 000 - 0
|
---|
72 | 167 Unknown_Attribute ------ 100 100 000 - 0
|
---|
73 | 192 Power-Off_Retract_Count ------ 100 100 000 - 2
|
---|
74 | 194 Temperature_Celsius ------ 100 100 000 - 33
|
---|
75 | 195 Hardware_ECC_Recovered ------ 100 100 000 - 15
|
---|
76 | 196 Reallocated_Event_Count ------ 100 100 000 - 0
|
---|
77 | 241 Total_LBAs_Written ------ 100 100 000 - 0
|
---|
78 | 242 Total_LBAs_Read ------ 100 100 000 - 0
|
---|
79 | ||||||_ K auto-keep
|
---|
80 | |||||__ C event count
|
---|
81 | ||||___ R error rate
|
---|
82 | |||____ S speed/performance
|
---|
83 | ||_____ O updated online
|
---|
84 | |______ P prefailure warning
|
---|
85 |
|
---|
86 | General Purpose Log Directory Version 1
|
---|
87 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
88 | Address Access R/W Size Description
|
---|
89 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
90 | 0x01 SL R/O 1 Summary SMART error log
|
---|
91 | 0x02 SL R/O 51 Comprehensive SMART error log
|
---|
92 | 0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
---|
93 | 0x04 GPL,SL R/O 8 Device Statistics log
|
---|
94 | 0x06 SL R/O 1 SMART self-test log
|
---|
95 | 0x07 GPL R/O 1 Extended self-test log
|
---|
96 | 0x09 SL R/W 1 Selective self-test log
|
---|
97 | 0x10 GPL R/O 1 SATA NCQ Queued Error log
|
---|
98 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
---|
99 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
---|
100 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
101 |
|
---|
102 | SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
---|
103 | No Errors Logged
|
---|
104 |
|
---|
105 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
106 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
107 | # 1 Short offline Completed without error 00% 0 -
|
---|
108 |
|
---|
109 | SMART Selective self-test log data structure revision number 0
|
---|
110 | Note: revision number not 1 implies that no selective self-test has ever been run
|
---|
111 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
112 | 1 0 0 Not_testing
|
---|
113 | 2 0 0 Not_testing
|
---|
114 | 3 0 0 Not_testing
|
---|
115 | 4 0 0 Not_testing
|
---|
116 | 5 0 0 Not_testing
|
---|
117 | Selective self-test flags (0x0):
|
---|
118 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
119 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
120 |
|
---|
121 | SCT Commands not supported
|
---|
122 |
|
---|
123 | Device Statistics (GP Log 0x04)
|
---|
124 | Page Offset Size Value Flags Description
|
---|
125 | 0x01 ===== = = === == General Statistics (rev 1) ==
|
---|
126 | 0x01 0x008 4 2 --- Lifetime Power-On Resets
|
---|
127 | 0x01 0x010 4 0 --- Power-on Hours
|
---|
128 | 0x01 0x018 6 0 --- Logical Sectors Written
|
---|
129 | 0x01 0x028 6 2123 --- Logical Sectors Read
|
---|
130 | 0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
---|
131 | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
---|
132 | 0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
---|
133 | 0x05 0x008 1 33 --- Current Temperature
|
---|
134 | 0x05 0x020 1 33 --- Highest Temperature
|
---|
135 | 0x05 0x028 1 33 --- Lowest Temperature
|
---|
136 | 0x06 ===== = = === == Transport Statistics (rev 1) ==
|
---|
137 | 0x06 0x018 4 0 --- Number of Interface CRC Errors
|
---|
138 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
---|
139 | 0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|
---|
140 | |||_ C monitored condition met
|
---|
141 | ||__ D supports DSN
|
---|
142 | |___ N normalized value
|
---|
143 |
|
---|
144 | SATA Phy Event Counters (GP Log 0x11)
|
---|
145 | ID Size Value Description
|
---|
146 | 0x0001 2 0 Command failed due to ICRC error
|
---|
147 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
---|
148 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
---|
149 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
---|
150 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
---|
151 | 0x0008 2 0 Device-to-host non-data FIS retries
|
---|
152 | 0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy
|
---|
153 | 0x000a 4 1 Device-to-host register FISes sent due to a COMRESET
|
---|
154 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
---|
155 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
---|
156 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
---|
157 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
---|
158 |
|
---|