1 | smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.15.11-300.fc27.x86_64] (local build)
|
---|
2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Device Model: Samsung SSD 860 PRO 1TB
|
---|
6 | Serial Number: S41ANGAK202830B
|
---|
7 | LU WWN Device Id: 5 002538 e70024a94
|
---|
8 | Firmware Version: RVM01B6Q
|
---|
9 | User Capacity: 1,024,209,543,168 bytes [1.02 TB]
|
---|
10 | Sector Size: 512 bytes logical/physical
|
---|
11 | Rotation Rate: Solid State Device
|
---|
12 | Form Factor: 2.5 inches
|
---|
13 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
14 | ATA Version is: Unknown(0x09fc), ACS-4 T13/BSR INCITS 529 revision 5
|
---|
15 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
---|
16 | Local Time is: Tue Mar 20 21:01:49 2018 EDT
|
---|
17 | SMART support is: Available - device has SMART capability.
|
---|
18 | SMART support is: Enabled
|
---|
19 | AAM feature is: Unavailable
|
---|
20 | APM feature is: Unavailable
|
---|
21 | Rd look-ahead is: Enabled
|
---|
22 | Write cache is: Enabled
|
---|
23 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
---|
24 | Wt Cache Reorder: Unknown
|
---|
25 |
|
---|
26 | === START OF READ SMART DATA SECTION ===
|
---|
27 | SMART overall-health self-assessment test result: PASSED
|
---|
28 |
|
---|
29 | General SMART Values:
|
---|
30 | Offline data collection status: (0x00) Offline data collection activity
|
---|
31 | was never started.
|
---|
32 | Auto Offline Data Collection: Disabled.
|
---|
33 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
34 | without error or no self-test has ever
|
---|
35 | been run.
|
---|
36 | Total time to complete Offline
|
---|
37 | data collection: ( 0) seconds.
|
---|
38 | Offline data collection
|
---|
39 | capabilities: (0x53) SMART execute Offline immediate.
|
---|
40 | Auto Offline data collection on/off support.
|
---|
41 | Suspend Offline collection upon new
|
---|
42 | command.
|
---|
43 | No Offline surface scan supported.
|
---|
44 | Self-test supported.
|
---|
45 | No Conveyance Self-test supported.
|
---|
46 | Selective Self-test supported.
|
---|
47 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
48 | power-saving mode.
|
---|
49 | Supports SMART auto save timer.
|
---|
50 | Error logging capability: (0x01) Error logging supported.
|
---|
51 | General Purpose Logging supported.
|
---|
52 | Short self-test routine
|
---|
53 | recommended polling time: ( 2) minutes.
|
---|
54 | Extended self-test routine
|
---|
55 | recommended polling time: ( 85) minutes.
|
---|
56 | SCT capabilities: (0x003d) SCT Status supported.
|
---|
57 | SCT Error Recovery Control supported.
|
---|
58 | SCT Feature Control supported.
|
---|
59 | SCT Data Table supported.
|
---|
60 |
|
---|
61 | SMART Attributes Data Structure revision number: 1
|
---|
62 | Vendor Specific SMART Attributes with Thresholds:
|
---|
63 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
64 | 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
---|
65 | 9 Power_On_Hours -O--CK 100 100 000 - 0
|
---|
66 | 12 Power_Cycle_Count -O--CK 099 099 000 - 2
|
---|
67 | 177 Wear_Leveling_Count PO--C- 100 100 000 - 0
|
---|
68 | 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0
|
---|
69 | 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0
|
---|
70 | 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0
|
---|
71 | 183 Runtime_Bad_Block PO--C- 100 100 010 - 0
|
---|
72 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
---|
73 | 190 Airflow_Temperature_Cel -O--CK 068 067 000 - 32
|
---|
74 | 195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0
|
---|
75 | 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
|
---|
76 | 235 Unknown_Attribute -O--C- 100 100 000 - 0
|
---|
77 | 241 Total_LBAs_Written -O--CK 100 100 000 - 0
|
---|
78 | ||||||_ K auto-keep
|
---|
79 | |||||__ C event count
|
---|
80 | ||||___ R error rate
|
---|
81 | |||____ S speed/performance
|
---|
82 | ||_____ O updated online
|
---|
83 | |______ P prefailure warning
|
---|
84 |
|
---|
85 | General Purpose Log Directory Version 1
|
---|
86 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
87 | Address Access R/W Size Description
|
---|
88 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
89 | 0x01 SL R/O 1 Summary SMART error log
|
---|
90 | 0x02 SL R/O 1 Comprehensive SMART error log
|
---|
91 | 0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
---|
92 | 0x04 GPL,SL R/O 8 Device Statistics log
|
---|
93 | 0x06 SL R/O 1 SMART self-test log
|
---|
94 | 0x07 GPL R/O 1 Extended self-test log
|
---|
95 | 0x09 SL R/W 1 Selective self-test log
|
---|
96 | 0x10 GPL R/O 1 SATA NCQ Queued Error log
|
---|
97 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
---|
98 | 0x13 GPL R/O 1 SATA NCQ Send and Receive log
|
---|
99 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
---|
100 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
101 | 0xa1 SL VS 16 Device vendor specific log
|
---|
102 | 0xa5 SL VS 16 Device vendor specific log
|
---|
103 | 0xce-0xcf SL VS 16 Device vendor specific log
|
---|
104 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
---|
105 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
---|
106 |
|
---|
107 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
---|
108 | No Errors Logged
|
---|
109 |
|
---|
110 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
111 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
112 | # 1 Short offline Completed without error 00% 0 -
|
---|
113 |
|
---|
114 | SMART Selective self-test log data structure revision number 1
|
---|
115 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
116 | 1 0 0 Not_testing
|
---|
117 | 2 0 0 Not_testing
|
---|
118 | 3 0 0 Not_testing
|
---|
119 | 4 0 0 Not_testing
|
---|
120 | 5 0 0 Not_testing
|
---|
121 | Selective self-test flags (0x0):
|
---|
122 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
123 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
124 |
|
---|
125 | SCT Status Version: 3
|
---|
126 | SCT Version (vendor specific): 256 (0x0100)
|
---|
127 | SCT Support Level: 1
|
---|
128 | Device State: Active (0)
|
---|
129 | Current Temperature: 32 Celsius
|
---|
130 | Power Cycle Min/Max Temperature: 30/31 Celsius
|
---|
131 | Lifetime Min/Max Temperature: 40/40 Celsius
|
---|
132 | Under/Over Temperature Limit Count: 0/0
|
---|
133 | SMART Status: 0xc24f (PASSED)
|
---|
134 |
|
---|
135 | SCT Temperature History Version: 2
|
---|
136 | Temperature Sampling Period: 1 minute
|
---|
137 | Temperature Logging Interval: 10 minutes
|
---|
138 | Min/Max recommended Temperature: 0/70 Celsius
|
---|
139 | Min/Max Temperature Limit: 0/70 Celsius
|
---|
140 | Temperature History Size (Index): 128 (14)
|
---|
141 |
|
---|
142 | Index Estimated Time Temperature Celsius
|
---|
143 | 15 2018-03-19 23:50 ? -
|
---|
144 | ... ..(111 skipped). .. -
|
---|
145 | 127 2018-03-20 18:30 ? -
|
---|
146 | 0 2018-03-20 18:40 40 *********************
|
---|
147 | 1 2018-03-20 18:50 ? -
|
---|
148 | ... ..( 6 skipped). .. -
|
---|
149 | 8 2018-03-20 20:00 ? -
|
---|
150 | 9 2018-03-20 20:10 23 ****
|
---|
151 | 10 2018-03-20 20:20 ? -
|
---|
152 | 11 2018-03-20 20:30 ? -
|
---|
153 | 12 2018-03-20 20:40 30 ***********
|
---|
154 | 13 2018-03-20 20:50 30 ***********
|
---|
155 | 14 2018-03-20 21:00 31 ************
|
---|
156 |
|
---|
157 | SCT Error Recovery Control:
|
---|
158 | Read: Disabled
|
---|
159 | Write: Disabled
|
---|
160 |
|
---|
161 | Device Statistics (GP Log 0x04)
|
---|
162 | Page Offset Size Value Flags Description
|
---|
163 | 0x01 ===== = = === == General Statistics (rev 1) ==
|
---|
164 | 0x01 0x008 4 2 --- Lifetime Power-On Resets
|
---|
165 | 0x01 0x010 4 0 --- Power-on Hours
|
---|
166 | 0x01 0x018 6 0 --- Logical Sectors Written
|
---|
167 | 0x01 0x020 6 0 --- Number of Write Commands
|
---|
168 | 0x01 0x028 6 9228 --- Logical Sectors Read
|
---|
169 | 0x01 0x030 6 231 --- Number of Read Commands
|
---|
170 | 0x01 0x038 6 2244000 --- Date and Time TimeStamp
|
---|
171 | 0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
---|
172 | 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
|
---|
173 | 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
---|
174 | 0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
---|
175 | 0x05 0x008 1 32 --- Current Temperature
|
---|
176 | 0x05 0x020 1 40 --- Highest Temperature
|
---|
177 | 0x05 0x028 1 40 --- Lowest Temperature
|
---|
178 | 0x05 0x058 1 55 --- Specified Maximum Operating Temperature
|
---|
179 | 0x06 ===== = = === == Transport Statistics (rev 1) ==
|
---|
180 | 0x06 0x008 4 12 --- Number of Hardware Resets
|
---|
181 | 0x06 0x010 4 0 --- Number of ASR Events
|
---|
182 | 0x06 0x018 4 0 --- Number of Interface CRC Errors
|
---|
183 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
---|
184 | 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|
---|
185 | |||_ C monitored condition met
|
---|
186 | ||__ D supports DSN
|
---|
187 | |___ N normalized value
|
---|
188 |
|
---|
189 | SATA Phy Event Counters (GP Log 0x11)
|
---|
190 | ID Size Value Description
|
---|
191 | 0x0001 2 0 Command failed due to ICRC error
|
---|
192 | 0x0002 2 0 R_ERR response for data FIS
|
---|
193 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
---|
194 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
---|
195 | 0x0005 2 0 R_ERR response for non-data FIS
|
---|
196 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
---|
197 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
---|
198 | 0x0008 2 0 Device-to-host non-data FIS retries
|
---|
199 | 0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy
|
---|
200 | 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET
|
---|
201 | 0x000b 2 0 CRC errors within host-to-device FIS
|
---|
202 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
---|
203 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
---|
204 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
---|
205 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
---|
206 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
---|
207 |
|
---|