| 1 | smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-279.el6.x86_64] (local build)
|
|---|
| 2 | Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: CT2000MX500SSD1
|
|---|
| 6 | Firmware Version: M3CR010
|
|---|
| 7 | User Capacity: 2,000,398,934,016 bytes [2.00 TB]
|
|---|
| 8 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
|---|
| 9 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 10 | ATA Version is: 8
|
|---|
| 11 | ATA Standard is: ACS-3 (unknown minor revision code: 0x006d)
|
|---|
| 12 | Local Time is: Wed Feb 14 20:49:56 2018 JST
|
|---|
| 13 | SMART support is: Available - device has SMART capability.
|
|---|
| 14 | SMART support is: Enabled
|
|---|
| 15 | AAM feature is: Unavailable
|
|---|
| 16 | APM level is: 254 (maximum performance)
|
|---|
| 17 | Rd look-ahead is: Enabled
|
|---|
| 18 | Write cache is: Enabled
|
|---|
| 19 | ATA Security is: Disabled, frozen [SEC2]
|
|---|
| 20 |
|
|---|
| 21 | === START OF READ SMART DATA SECTION ===
|
|---|
| 22 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 23 |
|
|---|
| 24 | General SMART Values:
|
|---|
| 25 | Offline data collection status: (0x82) Offline data collection activity
|
|---|
| 26 | was completed without error.
|
|---|
| 27 | Auto Offline Data Collection: Enabled.
|
|---|
| 28 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 29 | without error or no self-test has ever
|
|---|
| 30 | been run.
|
|---|
| 31 | Total time to complete Offline
|
|---|
| 32 | data collection: ( 0) seconds.
|
|---|
| 33 | Offline data collection
|
|---|
| 34 | capabilities: (0x7b) SMART execute Offline immediate.
|
|---|
| 35 | Auto Offline data collection on/off support.
|
|---|
| 36 | Suspend Offline collection upon new
|
|---|
| 37 | command.
|
|---|
| 38 | Offline surface scan supported.
|
|---|
| 39 | Self-test supported.
|
|---|
| 40 | Conveyance Self-test supported.
|
|---|
| 41 | Selective Self-test supported.
|
|---|
| 42 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 43 | power-saving mode.
|
|---|
| 44 | Supports SMART auto save timer.
|
|---|
| 45 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 46 | General Purpose Logging supported.
|
|---|
| 47 | Short self-test routine
|
|---|
| 48 | recommended polling time: ( 2) minutes.
|
|---|
| 49 | Extended self-test routine
|
|---|
| 50 | recommended polling time: ( 30) minutes.
|
|---|
| 51 | Conveyance self-test routine
|
|---|
| 52 | recommended polling time: ( 2) minutes.
|
|---|
| 53 | SCT capabilities: (0x0031) SCT Status supported.
|
|---|
| 54 | SCT Feature Control supported.
|
|---|
| 55 | SCT Data Table supported.
|
|---|
| 56 |
|
|---|
| 57 | SMART Attributes Data Structure revision number: 16
|
|---|
| 58 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 59 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 60 | 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0
|
|---|
| 61 | 5 Reallocated_Sector_Ct -O--CK 100 100 010 - 0
|
|---|
| 62 | 9 Power_On_Hours -O--CK 100 100 000 - 0
|
|---|
| 63 | 12 Power_Cycle_Count -O--CK 100 100 000 - 4
|
|---|
| 64 | 171 Unknown_Attribute -O--CK 100 100 000 - 0
|
|---|
| 65 | 172 Unknown_Attribute -O--CK 100 100 000 - 0
|
|---|
| 66 | 173 Unknown_Attribute -O--CK 100 100 000 - 0
|
|---|
| 67 | 174 Unknown_Attribute -O--CK 100 100 000 - 0
|
|---|
| 68 | 180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 000 000 000 - 81
|
|---|
| 69 | 183 Runtime_Bad_Block -O--CK 100 100 000 - 0
|
|---|
| 70 | 184 End-to-End_Error -O--CK 100 100 000 - 0
|
|---|
| 71 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
|---|
| 72 | 194 Temperature_Celsius -O---K 067 058 000 - 33 (0 42 0 0 0)
|
|---|
| 73 | 196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
|---|
| 74 | 197 Current_Pending_Sector -O--CK 100 100 000 - 0
|
|---|
| 75 | 198 Offline_Uncorrectable ----CK 100 100 000 - 0
|
|---|
| 76 | 199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
|
|---|
| 77 | 202 Data_Address_Mark_Errs ----CK 100 100 001 - 0
|
|---|
| 78 | 206 Flying_Height -OSR-- 100 100 000 - 0
|
|---|
| 79 | 210 Unknown_Attribute -O--CK 100 100 000 - 0
|
|---|
| 80 | 246 Unknown_Attribute -O--CK 100 100 000 - 61346952
|
|---|
| 81 | 247 Unknown_Attribute -O--CK 100 100 000 - 973772
|
|---|
| 82 | 248 Unknown_Attribute -O--CK 100 100 000 - 3524
|
|---|
| 83 | ||||||_ K auto-keep
|
|---|
| 84 | |||||__ C event count
|
|---|
| 85 | ||||___ R error rate
|
|---|
| 86 | |||____ S speed/performance
|
|---|
| 87 | ||_____ O updated online
|
|---|
| 88 | |______ P prefailure warning
|
|---|
| 89 |
|
|---|
| 90 | General Purpose Log Directory Version 1
|
|---|
| 91 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 92 | GP/S Log at address 0x00 has 1 sectors [Log Directory]
|
|---|
| 93 | SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
|
|---|
| 94 | SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log]
|
|---|
| 95 | GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log]
|
|---|
| 96 | GP/S Log at address 0x04 has 8 sectors [Device Statistics log]
|
|---|
| 97 | SMART Log at address 0x06 has 1 sectors [SMART self-test log]
|
|---|
| 98 | GP Log at address 0x07 has 1 sectors [Extended self-test log]
|
|---|
| 99 | SMART Log at address 0x09 has 1 sectors [Selective self-test log]
|
|---|
| 100 | GP Log at address 0x10 has 1 sectors [NCQ Command Error log]
|
|---|
| 101 | GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
|
|---|
| 102 | GP Log at address 0x24 has 88 sectors [Current Device Internal Status Data log]
|
|---|
| 103 | GP Log at address 0x25 has 64 sectors [Saved Device Internal Status Data log]
|
|---|
| 104 | GP/S Log at address 0x30 has 9 sectors [IDENTIFY DEVICE data log]
|
|---|
| 105 | GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
|
|---|
| 106 | GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
|
|---|
| 107 | GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
|
|---|
| 108 | GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
|
|---|
| 109 | GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
|
|---|
| 110 | GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
|
|---|
| 111 | GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
|
|---|
| 112 | GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
|
|---|
| 113 | GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
|
|---|
| 114 | GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
|
|---|
| 115 | GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
|
|---|
| 116 | GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
|
|---|
| 117 | GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
|
|---|
| 118 | GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
|
|---|
| 119 | GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
|
|---|
| 120 | GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
|
|---|
| 121 | GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
|
|---|
| 122 | GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
|
|---|
| 123 | GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
|
|---|
| 124 | GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
|
|---|
| 125 | GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
|
|---|
| 126 | GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
|
|---|
| 127 | GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
|
|---|
| 128 | GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
|
|---|
| 129 | GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
|
|---|
| 130 | GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
|
|---|
| 131 | GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
|
|---|
| 132 | GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
|
|---|
| 133 | GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
|
|---|
| 134 | GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
|
|---|
| 135 | GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
|
|---|
| 136 | GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
|
|---|
| 137 | GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
|
|---|
| 138 | GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
|
|---|
| 139 |
|
|---|
| 140 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
|---|
| 141 | No Errors Logged
|
|---|
| 142 |
|
|---|
| 143 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
|---|
| 144 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 145 | # 1 Short offline Completed without error 00% 0 -
|
|---|
| 146 |
|
|---|
| 147 | SMART Selective self-test log data structure revision number 1
|
|---|
| 148 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 149 | 1 0 0 Not_testing
|
|---|
| 150 | 2 0 0 Not_testing
|
|---|
| 151 | 3 0 0 Not_testing
|
|---|
| 152 | 4 0 0 Not_testing
|
|---|
| 153 | 5 0 0 Not_testing
|
|---|
| 154 | Selective self-test flags (0x0):
|
|---|
| 155 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 156 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 157 |
|
|---|
| 158 | SCT Status Version: 3
|
|---|
| 159 | SCT Version (vendor specific): 1 (0x0001)
|
|---|
| 160 | SCT Support Level: 0
|
|---|
| 161 | Device State: Active (0)
|
|---|
| 162 | Current Temperature: 33 Celsius
|
|---|
| 163 | Power Cycle Min/Max Temperature: 33/39 Celsius
|
|---|
| 164 | Lifetime Min/Max Temperature: 0/42 Celsius
|
|---|
| 165 | Under/Over Temperature Limit Count: 0/0
|
|---|
| 166 | SCT Temperature History Version: 2
|
|---|
| 167 | Temperature Sampling Period: 1 minute
|
|---|
| 168 | Temperature Logging Interval: 1 minute
|
|---|
| 169 | Min/Max recommended Temperature: 0/100 Celsius
|
|---|
| 170 | Min/Max Temperature Limit: 0/100 Celsius
|
|---|
| 171 | Temperature History Size (Index): 128 (10)
|
|---|
| 172 |
|
|---|
| 173 | Index Estimated Time Temperature Celsius
|
|---|
| 174 | 11 2018-02-14 18:42 0 -
|
|---|
| 175 | ... ..(115 skipped). .. -
|
|---|
| 176 | 127 2018-02-14 20:38 0 -
|
|---|
| 177 | 0 2018-02-14 20:39 ? -
|
|---|
| 178 | ... ..( 2 skipped). .. -
|
|---|
| 179 | 3 2018-02-14 20:42 ? -
|
|---|
| 180 | 4 2018-02-14 20:43 33 **************
|
|---|
| 181 | 5 2018-02-14 20:44 42 ***********************
|
|---|
| 182 | 6 2018-02-14 20:45 ? -
|
|---|
| 183 | 7 2018-02-14 20:46 ? -
|
|---|
| 184 | 8 2018-02-14 20:47 34 ***************
|
|---|
| 185 | 9 2018-02-14 20:48 39 ********************
|
|---|
| 186 | 10 2018-02-14 20:49 33 **************
|
|---|
| 187 |
|
|---|
| 188 | Warning: device does not support SCT Error Recovery Control command
|
|---|
| 189 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 190 | ID Size Value Description
|
|---|
| 191 | 0x0001 2 0 Command failed due to ICRC error
|
|---|
| 192 | 0x0002 2 0 R_ERR response for data FIS
|
|---|
| 193 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 194 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 195 | 0x0005 2 0 R_ERR response for non-data FIS
|
|---|
| 196 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 197 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 198 | 0x0008 2 0 Device-to-host non-data FIS retries
|
|---|
| 199 | 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
|
|---|
| 200 | 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 201 | 0x000b 2 0 CRC errors within host-to-device FIS
|
|---|
| 202 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|---|
| 203 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|---|
| 204 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
|---|
| 205 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|---|
| 206 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|---|
| 207 |
|
|---|
