| 1 | smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.67] (local build)
|
|---|
| 2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Model Family: Hitachi Deskstar 7K500
|
|---|
| 6 | Device Model: HDS725050KLAT80
|
|---|
| 7 | Firmware Version: K2AOAB0A
|
|---|
| 8 | User Capacity: 500.107.862.016 bytes [500 GB]
|
|---|
| 9 | Sector Size: 512 bytes logical/physical
|
|---|
| 10 | Device is: In smartctl database [for details use: -P show]
|
|---|
| 11 | ATA Version is: ATA/ATAPI-7 T13/1532D revision 1
|
|---|
| 12 | Local Time is: Sat Dec 9 04:18:05 2017 CET
|
|---|
| 13 | SMART support is: Available - device has SMART capability.
|
|---|
| 14 | SMART support is: Enabled
|
|---|
| 15 | AAM feature is: Disabled
|
|---|
| 16 | APM feature is: Disabled
|
|---|
| 17 | Rd look-ahead is: Enabled
|
|---|
| 18 | Write cache is: Enabled
|
|---|
| 19 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|---|
| 20 | Write SCT (Get) Feature Control Command failed: Read of ATA output registers not implemented [JMicron]
|
|---|
| 21 | Wt Cache Reorder: Unknown (SCT Feature Control command failed)
|
|---|
| 22 |
|
|---|
| 23 | === START OF READ SMART DATA SECTION ===
|
|---|
| 24 | SMART Status not supported: Incomplete response, status byte missing [JMicron]
|
|---|
| 25 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 26 | Warning: This result is based on an Attribute check.
|
|---|
| 27 |
|
|---|
| 28 | General SMART Values:
|
|---|
| 29 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 30 | was never started.
|
|---|
| 31 | Auto Offline Data Collection: Disabled.
|
|---|
| 32 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 33 | without error or no self-test has ever
|
|---|
| 34 | been run.
|
|---|
| 35 | Total time to complete Offline
|
|---|
| 36 | data collection: (10419) seconds.
|
|---|
| 37 | Offline data collection
|
|---|
| 38 | capabilities: (0x5b) SMART execute Offline immediate.
|
|---|
| 39 | Auto Offline data collection on/off support.
|
|---|
| 40 | Suspend Offline collection upon new
|
|---|
| 41 | command.
|
|---|
| 42 | Offline surface scan supported.
|
|---|
| 43 | Self-test supported.
|
|---|
| 44 | No Conveyance Self-test supported.
|
|---|
| 45 | Selective Self-test supported.
|
|---|
| 46 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 47 | power-saving mode.
|
|---|
| 48 | Supports SMART auto save timer.
|
|---|
| 49 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 50 | General Purpose Logging supported.
|
|---|
| 51 | Short self-test routine
|
|---|
| 52 | recommended polling time: ( 1) minutes.
|
|---|
| 53 | Extended self-test routine
|
|---|
| 54 | recommended polling time: ( 174) minutes.
|
|---|
| 55 | SCT capabilities: (0x003f) SCT Status supported.
|
|---|
| 56 | SCT Error Recovery Control supported.
|
|---|
| 57 | SCT Feature Control supported.
|
|---|
| 58 | SCT Data Table supported.
|
|---|
| 59 |
|
|---|
| 60 | SMART Attributes Data Structure revision number: 16
|
|---|
| 61 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 62 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 63 | 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
|
|---|
| 64 | 2 Throughput_Performance P-S--- 100 100 050 - 0
|
|---|
| 65 | 3 Spin_Up_Time POS--- 108 108 024 - 641 (Average 645)
|
|---|
| 66 | 4 Start_Stop_Count -O--C- 100 100 000 - 584
|
|---|
| 67 | 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
|
|---|
| 68 | 7 Seek_Error_Rate PO-R-- 100 100 067 - 0
|
|---|
| 69 | 8 Seek_Time_Performance P-S--- 100 100 020 - 0
|
|---|
| 70 | 9 Power_On_Hours -O--C- 100 100 000 - 4556
|
|---|
| 71 | 10 Spin_Retry_Count PO--C- 100 100 060 - 0
|
|---|
| 72 | 12 Power_Cycle_Count -O--CK 100 100 000 - 463
|
|---|
| 73 | 192 Power-Off_Retract_Count -O--CK 100 100 050 - 735
|
|---|
| 74 | 193 Load_Cycle_Count -O--C- 100 100 050 - 735
|
|---|
| 75 | 194 Temperature_Celsius -O---- 114 114 000 - 48 (Min/Max 16/58)
|
|---|
| 76 | 196 Reallocated_Event_Count -O--CK 100 100 000 - 0
|
|---|
| 77 | 197 Current_Pending_Sector -O---K 100 100 000 - 0
|
|---|
| 78 | 198 Offline_Uncorrectable ---R-- 100 100 000 - 0
|
|---|
| 79 | 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
|
|---|
| 80 | ||||||_ K auto-keep
|
|---|
| 81 | |||||__ C event count
|
|---|
| 82 | ||||___ R error rate
|
|---|
| 83 | |||____ S speed/performance
|
|---|
| 84 | ||_____ O updated online
|
|---|
| 85 | |______ P prefailure warning
|
|---|
| 86 |
|
|---|
| 87 | ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented [JMicron]
|
|---|
| 88 | Read GP Log Directory failed
|
|---|
| 89 |
|
|---|
| 90 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 91 | Address Access R/W Size Description
|
|---|
| 92 | 0x00 SL R/O 1 Log Directory
|
|---|
| 93 | 0x01 SL R/O 1 Summary SMART error log
|
|---|
| 94 | 0x06 SL R/O 1 SMART self-test log
|
|---|
| 95 | 0x09 SL R/W 1 Selective self-test log
|
|---|
| 96 | 0x80-0x9f SL R/W 16 Host vendor specific log
|
|---|
| 97 | 0xe0 SL R/W 1 SCT Command/Status
|
|---|
| 98 | 0xe1 SL R/W 1 SCT Data Transfer
|
|---|
| 99 |
|
|---|
| 100 | SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
|---|
| 101 |
|
|---|
| 102 | SMART Error Log Version: 1
|
|---|
| 103 | No Errors Logged
|
|---|
| 104 |
|
|---|
| 105 | SMART Extended Self-test Log (GP Log 0x07) not supported
|
|---|
| 106 |
|
|---|
| 107 | SMART Self-test log structure revision number 1
|
|---|
| 108 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 109 | # 1 Short offline Completed without error 00% 4556 -
|
|---|
| 110 |
|
|---|
| 111 | Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
|
|---|
| 112 | SMART Selective self-test log data structure revision number 1
|
|---|
| 113 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 114 | 1 0 0 Not_testing
|
|---|
| 115 | 2 0 0 Not_testing
|
|---|
| 116 | 3 0 0 Not_testing
|
|---|
| 117 | 4 0 0 Not_testing
|
|---|
| 118 | 5 0 0 Not_testing
|
|---|
| 119 | Selective self-test flags (0x0):
|
|---|
| 120 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 121 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 122 |
|
|---|
| 123 | SCT Status Version: 2
|
|---|
| 124 | SCT Version (vendor specific): 256 (0x0100)
|
|---|
| 125 | SCT Support Level: 1
|
|---|
| 126 | Device State: Active (0)
|
|---|
| 127 | Current Temperature: 48 Celsius
|
|---|
| 128 | Power Cycle Max Temperature: 49 Celsius
|
|---|
| 129 | Lifetime Max Temperature: 58 Celsius
|
|---|
| 130 |
|
|---|
| 131 | SCT Temperature History Version: 2
|
|---|
| 132 | Temperature Sampling Period: 1 minute
|
|---|
| 133 | Temperature Logging Interval: 1 minute
|
|---|
| 134 | Min/Max recommended Temperature: 5/60 Celsius
|
|---|
| 135 | Min/Max Temperature Limit: -40/65 Celsius
|
|---|
| 136 | Temperature History Size (Index): 128 (50)
|
|---|
| 137 |
|
|---|
| 138 | Index Estimated Time Temperature Celsius
|
|---|
| 139 | 51 2017-12-09 02:11 48 *****************************
|
|---|
| 140 | ... ..( 31 skipped). .. *****************************
|
|---|
| 141 | 83 2017-12-09 02:43 48 *****************************
|
|---|
| 142 | 84 2017-12-09 02:44 49 ******************************
|
|---|
| 143 | ... ..( 16 skipped). .. ******************************
|
|---|
| 144 | 101 2017-12-09 03:01 49 ******************************
|
|---|
| 145 | 102 2017-12-09 03:02 48 *****************************
|
|---|
| 146 | ... ..( 75 skipped). .. *****************************
|
|---|
| 147 | 50 2017-12-09 04:18 48 *****************************
|
|---|
| 148 |
|
|---|
| 149 | Write SCT (Get) Error Recovery Control Command failed: Read of ATA output registers not implemented [JMicron]
|
|---|
| 150 | SCT (Get) Error Recovery Control command failed
|
|---|
| 151 |
|
|---|
| 152 | Device Statistics (GP/SMART Log 0x04) not supported
|
|---|
| 153 |
|
|---|
| 154 | SATA Phy Event Counters (GP Log 0x11) not supported
|
|---|
| 155 |
|
|---|
